Last Updated 6 days ago
Overview
The ARRI Omnibar 2 is a 2ft-class battery-powered LED bar with 16 pixel zones, a 49Wh internal battery and magnetically swappable front optics. Its RGBMA engine provides adjustable white light and full-colour effects. The flat bar body, end connections and dedicated rigging system make it useful as a hidden source, a visible design element or part of a larger pixel array.
Key specifications
| Specification | Details |
|---|---|
| Fixture / light engine | 2ft-class modular linear LED; five-colour RGBMA (red, green, blue, mint, amber) |
| Nominal consumption | 25W |
| Pixel zones | 16 |
| White range / tint | 1,700–20,000K; continuous green–magenta adjustment |
| Modes | CCT, HSI, RGBMA, xy, gels, cinema and pixel effects |
| Interchangeable optics | 115° open face; 145° Round Diffuser; 130° Flat Diffuser; 60° Intensifier |
| Internal battery | 49Wh; manufacturer runtime about 2 hours at maximum brightness, up to 24 hours at lower levels |
| Nominal charging time | 2 hours |
| DC supply / connection | 24V DC; published supply reference 2.1A; 5.5 × 2.1mm barrel in and through |
| Wireless control | Bluetooth Mesh / Omnibar Control app; internal LumenRadio CRMX |
| Wired control | DMX, Art-Net and sACN through the separate Omnibase and compatible power/data cables |
| Bare-fixture dimensions | 609 × 44.6 × 40mm; optics excluded |
| Bare-fixture weight | 1.3kg; optics and rigging excluded |
| Mounting | 2 built-in magnetic connection points; dedicated clip/grip, pin, tie and eyebolt options |
| Protection / ambient | IP65; 0–40°C normal operation; 0–25°C in Boost |
| Manufacturer colour ratings | High Color Rendition mode at 3,200–5,600K: average CRI >98, TLCI >98, TM-30 >93 |
Technical reference: ARRI specifications.
Strengths and limitations
- Strengths: internal battery, integrated CRMX, swappable optics and a mounting system designed for single bars and connected arrays.
- Trade-offs: a 2ft narrow aperture creates a different key and reflection from a broad soft panel; wired control and multi-bar power require the correct additional hardware.
- Choose it for: fast concealed lighting, controlled line reflections or visible pixel effects where a battery bar saves cable and rigging time.
Practical uses
| Setup | Working approach |
|---|---|
| Small concealed source | The shorter body fits where a four-foot tube is awkward, including tight set details and small product rigs. Keep the control and charging end reachable after the bar is installed. |
| Visible pixel effects | Use the 16 zones for a chase or changing colour pattern. Record the mounting direction and pixel order so effects travel the intended way across a multi-bar rig. |
| Close key or strip reflection | Use the Round Diffuser or a compatible soft-light modifier close to the subject. The long, narrow source creates a different reflection and shadow pattern from a broad panel. |
Output and colour
ARRI’s Omnibar photometric chart lists these illuminance values at 5,600K. They are manufacturer measurements for this exact length and optic, not figures borrowed from the other Omnibar size.
| 5,600K configuration | 1m | 3m | 5m |
|---|---|---|---|
| Open face, 115° | 784 lux | 96 lux | 34 lux |
| Round Diffuser, 145° | 473 lux | 56 lux | 20 lux |
| Flat Diffuser, 130° | 419 lux | 50 lux | 18 lux |
| Intensifier, 60° | 834 lux | 105 lux | 38 lux |
The Intensifier narrows the field; the Round Diffuser spreads the light more widely. Its lower centre reading is part of that broader distribution, not a measurement of total light by itself. Open face is a separate optical configuration with a more exposed LED appearance.
The RGBMA engine differs from the RGBW engine in SkyPanel Classic and Pro and the RGBACL engine in Orbiter and SkyPanel X. Match the bars through the production camera and working modifier; a shared Kelvin setting does not establish an identical spectrum.
Power and batteries
The internal battery is 49Wh. ARRI’s approximately two-hour full-brightness runtime and “up to 24 hours” reduced-output runtime refer to different brightness conditions. Nominal recharge time is 2 hours; check runtime at the required CCT, effect, brightness and battery condition before a long take.
The universal 100–240V AC charger is intended for one bar. ARRI’s FAQ explicitly excludes using that single-fixture charger for daisy-chaining. Use Omnibase and the prescribed power/data wiring for a powered multi-bar system.
Omnibase supports up to six Omnibar 4s, twelve Omnibar 2s, or a mixed total length of 24ft. Ports 1–2 each allow up to 12ft; ports 3–6 each allow up to 6ft, while the overall 24ft limit still applies. These are different per-port and whole-system limits.
The battery is service-replaceable through rental houses and authorized service partners. A replaceable internal battery is not the same as a hot-swappable V-mount slot. Include battery condition and the charging plan in a used purchase or rental order.
Control, cooling and camera operation
| Control route | Hardware and operating detail |
|---|---|
| Onboard / app | Use the local controls or dedicated Omnibar Control app. Bluetooth Mesh relays commands between compatible bars. |
| CRMX | The integrated receiver accepts supported wireless DMX. Confirm pairing, universe and personality before the bar is hidden or hung. |
| Wired DMX / network | Omnibase provides the wired DMX / Art-Net / sACN workflow through the compatible power/data connections. The bar itself has no conventional 5-pin XLR socket. |
| Pixel control | This model has 16 zones. Match console personality, channel footprint and pixel orientation to the fixture’s configuration. |
Normal ambient range is 0–40°C; Boost has the lower 0–25°C range. Set the intended output mode before exposure and runtime tests. Confirm dimming and pixel effects at the production shutter and frame rate, including low-level fades.
Modifiers, rigging and the working package
| Accessory / interface | Use |
|---|---|
| Round Diffuser | A wider, tube-like emitting surface; 145° manufacturer beam. |
| Flat Diffuser | A flat emitting face for line effects and more defined panel-style reflections; 130°. |
| Intensifier | A narrower 60° beam for more directional illumination. |
| Omnigrip / Omnipin | Dedicated mounting system with a 16mm pin option; also used for bar-to-bar connections. |
| Magnets / clips / eyebolts | Select the proper fitting for the surface and orientation; provide independent retention where required. |
Bare weight is 1.3kg before optics, grip fittings and cables. The integrated magnets are useful mounting points, but the surface condition, geometry and load direction determine their practical hold. Use an appropriate safety attachment for suspended work. IP65 applies to the fixture in its prescribed configuration; it does not automatically weather-rate a separate power supply or connection.
Alternatives and related fixtures
| Fixture | Why compare it |
|---|---|
| Omnibar 4 | The other length in the same system changes aperture, pixel count, battery capacity and working footprint. |
| ARRI SkyPanel S30-C | A broader soft panel for a key or fill when a narrow bar is the wrong source shape. |
| ARRI Orbiter | A point source with interchangeable optics for a directional beam or a larger external softbox. |
| ARRI Omnibar 4 | The four-foot version has 32 zones and a longer emitting aperture; choose it for extended line reflections or larger pixel arrays. |
What people are saying
In his hands-on Omnibar review, Matthew Allard found the short bar useful with a Caligri Airtube as a close interview key. His detailed photometric testing used the Omnibar 4. The two lengths should be assessed separately for output and coverage.
ARRI’s published user feedback includes cinematographer Benjamin-Martyn Wheeler discussing the straightforward interface and gaffer Danny Durr highlighting rigging options. These comments were selected and published by the manufacturer.
Videos
ARRI Omnibar: The Guided Tour. Manufacturer demonstration of the two lengths, optics, mounting and control.
ARRI Tech Talk: Omnibar. A longer manufacturer discussion of the linear lighting system.
Rental and used-fixture checks
- Confirm the actual 2ft model, included optics and whether the order is a bare fixture, individual set or multi-bar kit.
- Charge fully and test the needed working brightness, including battery condition after sustained operation.
- Inspect the barrel connectors, optical retainers, clip fittings and safety points; verify each intended mounting surface.
- Check firmware, app connection, CRMX pairing, DMX personality and pixel orientation before installing the bars.
- For wired multi-bar operation, confirm Omnibase, compatible power/data cables, per-port load and the overall length limit.
Documentation and specifications
- ARRI Omnibar product overview
- ARRI Omnibar technical data and downloads
- ARRI Omnibar photometric chart
- ARRI Omnibar FAQ, power and control limits
Browse ARRI lights · LED tubes and bars · all equipment.