ARRI L7-C

Last Updated 2 days ago

Overview

arri l7c

The ARRI L7-C is a colour-tunable LED Fresnel with continuous spot-to-flood adjustment. This is the Classic L7-C generation.

The Classic L7-C is a focusing colour Fresnel for familiar spot/flood and barn-door work. Identify original versus LE2 generation and distinguish both from the newer L7-C Plus before using any output or control comparison.

Key specifications

SpecificationDetails
Engine / CCTRGBW; 2,800–10,000K with hue/saturation and G/M control
Fresnel / beam175mm lens; 15–50° half-peak angle
Maximum consumption220W
Manual / pole-operated version8.2kg / 10.0kg
Mount28mm Junior pin
ControlOnboard, 5-pin DMX/RDM; wireless via external SkyLink hardware
Rating / temperatureIP20; −20°C to 45°C
Key specifications

Focused Output at 3m

Beam setting3,200K5,600K
Spot, 15°6,689 lux7,511 lux
Middle, 30°1,980 lux2,210 lux
Flood, 50°807 lux898 lux
Key specifications

Strengths and limitations

Strengths

  • A true adjustable Fresnel beam supports spot/flood and barn-door shaping.
  • Full-colour operation avoids reducing the fixture to a tunable-white-only description.

Limitations

  • Classic, LE2 and Plus revisions need distinct technical references.
  • Its weight and IP20 housing suit a different package from a small weather-rated COB.

Practical uses

Use it where Fresnel beam control, barn-door shaping and colour changes are useful. On a used fixture, check the LED-engine revision, firmware, cooling and focus travel as well as the power and mounting hardware.

SetupHow to use this fixture
Controlled key or backlightSet the 175mm Fresnel’s focus before level, then trim the beam with barn doors. Inspect the cut on the actual set surface.
Studio gridSpecify pole operation when pan, tilt and focus must be adjusted from below. Include the correct mounting and front accessories.
Colour matchingUse CCT and tint for the existing white source, or hue/saturation for a coloured cue. Test the actual colour’s exposure rather than retaining a daylight spot estimate.
Lighting setups

Back to contents

Output and colour

The Classic L7-C uses a 175mm Fresnel lens with a 15–50° spot/flood range. Its RGBW engine provides colour as well as 2,800–10,000K white and tint adjustment. The 3m table shows 7,511 lux at 5,600K/15° spot versus 898 lux at 50° flood: focus changes beam concentration and usable coverage. Barn doors shape the focused beam; they do not turn it into a projection attachment.

Sources: ARRI L7-C documentation (PDF); L7 C | L-Series C | Lighting | ARRI.

The cited 3m/5,600K spot reading of 7,511 lux is about 8.4 times the 898-lux flood reading. The narrower beam explains that concentration; a flood setup needs its own exposure plan. Barn doors shape spill but do not supply the sharp imaging capability of a projection optic.

ARRI identifies LE2 as brighter than the earlier L7-C engine. Used units and mixed rental stock should therefore be identified by light-engine version before matching. Competitive comparisons in older videos also belong to their publication period.

Tests and reviews

The Classic/LE2 discussion covers focusing, construction, weight and output compared with newer fixtures. Story & Heart demonstrates the original Fresnel-and-colour workflow.

Read the L7-C LE2 discussion alongside the Classic documentation.

Back to contents

Power and batteries

The Classic L7-C sheet lists 220W maximum consumption. Stand-mounted, hanging and pole-operated versions use their specified power and mounting arrangements.

The lamp does not become a native camera-battery fixture because its draw is lower than a tungsten Fresnel’s. Specify the actual supported supply for the unit being hired.

Control, cooling and camera operation

Control pathHardware and operating notes
LocalCCT, tint, colour and intensity controls with mechanical spot/flood focus.
ConsoleIntegrated 5-pin DMX in/through and RDM, with the correct Classic/LE2 firmware and personality.
WirelessExternal SkyLink/receiver hardware; do not assume Plus-generation communications.
Mechanical operationManual or pole-operated pan/tilt/focus version selected with the rental.
Control options

For mixed-generation lighting cues, compare low-level fades and colour behaviour at the production camera’s shutter settings.

Leave cooling clearance in a grid or tight set position. A lamp near a ceiling can be close to an overhead microphone even when it is far from the operator.

Back to contents

Modifiers, rigging and the working package

The manual Classic weighs 8.2kg and pole-operated version 10.0kg. Both need the appropriate 28mm Junior support. Include the barn doors, accessory frame and cable in the working load, and check focus travel with the front accessories installed. The IP20 rating provides no rated water protection; maintain cooling clearance in a grid or enclosed set position.

ItemPublished or model-specific requirement
Manual version8.2kg
Pole-operated version10.0kg
Mount28mm Junior pin
Front system175mm Fresnel, barn doors and correct accessory frame
HousingIP20; −20°C to 45°C operating reference
Classic L7-C package

The sliding stirrup helps balance the fixture with front accessories and adjust hanging clearance. Exercise focus and tilt after fitting the barn doors. Inspect the lens, focus mechanism, tilt lock and accessory retention on a used unit.

Back to contents

Alternatives and related fixtures

FixtureWhen to compare it
ARRI OrbiterCompare Orbiter when interchangeable QLM optics and a six-colour engine are useful, with its greater head load.
ARRI Skypanel S60-CChoose a broad soft panel when a large emitting surface matters more than Fresnel beam shaping.
Alternative fixtures

Back to contents

What people are saying

Reddit, r/cinematography

Contributors discussing the Classic L7-C LE2 appreciate its construction and focusing, but several find it heavy and low in output beside newer fixtures. View discussion.

Story & Heart

The video presents the L7-C as a way to combine familiar Fresnel operation with LED colour control. It is older coverage, so its competitive comparisons need to be read in the context of its publication date. Watch video.

Videos

Story & Heart examines the L7-C’s LED Fresnel design and colour controls.

Back to contents

Rental and used-fixture checks

  • Identify the light-engine revision and firmware before matching several heads.
  • Run the full focus range and inspect lens, barn-door latch and yoke/pole mechanism.
  • Test cooling and low-level colour/dimming behaviour with the intended profile.

Documentation and specifications

Back to contents