Godox KNOWLED M300R

Last Updated 2 weeks ago

Overview

M300R

The Godox KNOWLED M300R is a full-colour Bowens-mount LED with a separate controller and battery-capable power options. It provides a smaller package than the M600R while retaining adjustable white light and saturated-colour operation.

M300R brings full colour and console/network control to a smaller Bowens head. Its 460W maximum input and reduced-output battery/fan-off arrangements matter more than the “300” name when planning a location setup.

Key specifications

SpecificationDetails
Engine / rangeFull colour; 1,800–10,000K and ±100% G/M
Maximum AC input460W; 100–240V, 50/60Hz
Manufacturer colour referencesCRI approximately 96; TLCI approximately 95
Head / controller3.6kg / 3.1kg, excluding stated head accessories
Head dimensionsApproximately 7.09 × 9.61 × 6.14in without U-bracket/reflector
Accessory mountBowens; model-compatible BR/BP/soft-light accessories
ControlsDMX/RDM, internal CRMX, Art-Net/sACN, Bluetooth and controller
Battery supportSupported V-mount arrangement; output limits depend on configuration
Protection / temperatureIP65 prescribed head/controller configuration; −20°C to 45°C
Key specifications

Strengths and limitations

Strengths

  • A relatively small full-colour head includes CRMX and network options.
  • Bowens modifiers and supported battery operation provide several location configurations.

Limitations

  • 460W maximum input and separate controller are a larger package than the 300W name alone implies.
  • The review reports colour-score and interface limitations alongside strong reflector output.

Practical uses

Use it for coloured backgrounds, a compact key or projection with a compatible BP-series optic. Check the supported battery configuration and the required output before choosing it for a mains-free setup.

SetupHow to use this fixture
Compact colour keyFit the soft modifier and set the actual hue or white/tint before exposure. A narrow-reflector peak is not the transmitted key level.
Projected patternUse the exact compatible BP lens and support. The linked Threefold review shows an M300R/BP19K working package.
Battery interviewChoose the battery and fan configuration before setting exposure; the independent table below shows materially different results.
Lighting setups

Back to contents

Output and colour

The M300R is full colour with 1,800–10,000K CCT and ±100% tint adjustment. Godox quotes 101,000 lux at 1m/5,600K with BR30 on the product page, while the catalogue supplies a 3,880-lux reference at 5m with that reflector. Both are concentrated-reflector readings. BP projection output, bare-source coverage and saturated-colour performance require different measurements.

Mount, Photometrics and Working Configuration

Measurement conditionManufacturer illuminance
M300R, 5,600K, BR30 reflector, 5m3,880 lux
Manufacturer photometrics, in lux

Sources: Godox KNOWLED lighting catalogue: English; model-specific tables; M300R-Product-KNOWLED.

Godox’s catalogue lists 101,000 lux at 1m/5,600K with BR30 and a separate 3,880-lux reference at 5m. The review uses its stated test settings and distances.

A smaller head helps placement, but saturated colour, projection focus and diffusion each create a different exposure requirement. Choose the actual source configuration before deciding whether the lamp replaces a larger fixture.

Tests and reviews

Allard’s review separates battery, fan-off and High-Speed operation. All rows below use a 5,600K setting and 30° reflector at 1m. They show why the quiet or battery setup should be measured directly.

Independent configurationOutputMeasured CCT
Fan Off9,290 lux5,713K
High-Speed mode97,300 lux5,467K
One 14.8V V-mount battery24,800 lux6,195K
Two 14.8V V-mount batteries54,900 lux6,092K
Newsshooter review unit; configuration-specific results

Read the full M300R test conditions.

Back to contents

Power and batteries

Maximum AC input is 460W. Supported V-mount operation is a different configuration: Allard reports manufacturer limits of 30% with one 14.8V pack and 70% with two. Pack capacity alone does not remove those limits.

Use the actual controller’s approved battery arrangement and continuous-current requirements. The separate 3.1kg controller, packs, charger, clamp and head cable all belong in a portable-kit comparison.

Control, cooling and camera operation

Control pathHardware and operating notes
Local / appController and supported Bluetooth/KNOWLED app operation.
ConsoleDMX512/RDM and internal LumenRadio CRMX.
NetworkEthernet Art-Net/sACN with universe and protocol recorded.
PersonalityFull-colour mode, selected dimming curve and installed firmware matched with the desk.
Control options

Choose cooling before final sound and exposure checks. A fan-off configuration is a reduced-output source, as the review demonstrates. Keep it distinct from the camera High-Speed mode.

For repeat cues, record the power source and white/tint result as well as intensity. The review’s battery readings show that the Kelvin display alone is not sufficient to describe the measured output.

Back to contents

Modifiers, rigging and the working package

The 3.6kg head and 3.1kg controller figures exclude the U-bracket and reflector. Bowens is the accessory interface, but BP projectors and Fresnels need a model-specific compatibility check. The review below uses a BP19K combination; confirm the physical fit, optical coverage and support on the actual order. The specified head/controller protection is IP65 with the prescribed connections.

PartWorking requirement
Head3.6kg before stated excluded U-bracket/reflector
Controller3.1kg before batteries
OpticsExact compatible BR reflector, BP projector or soft modifier
SupportYoke, front accessory support, clamp and head-cable slack
Weather arrangementPrescribed connected IP65 configuration
M300R complete package

Fit a projector or deep softbox before assessing balance and tilt clearance. A standard Bowens interface does not by itself establish thermal, optical or support compatibility for every accessory.

Back to contents

Alternatives and related fixtures

FixtureWhen to compare it
Godox KNOWLED M600RChoose the larger full-colour M600R when extra exposure is useful, allowing for its larger working head/controller.
Godox KNOWLED M600Bi ProChoose bi-colour Pro if saturated colours are unnecessary and its communications match the job.
Alternative fixtures

Back to contents

What people are saying

Matthew Allard ACS, Newsshooter

Allard praises output, manageable size, open-face CCT accuracy and saturated colours. His reservations are lower-than-expected TLCI and SSI scores, and a basic app and interface. Read article.

Caleb Hauff, Threefold Creative Studio

Hauff reviews the M300R with the BP19K projector and says Threefold uses and rents that equipment. The video provides a working-user perspective on the smaller fixture and optical package. Watch video.

Videos

Threefold Creative Studio uses the M300R with a BP19K projector.

Back to contents

Rental and used-fixture checks

  • Check the controller battery arrangement at the required output and record the limit.
  • Fit the exact BP/Fresnel/softbox and inspect the Bowens lock and yoke.
  • Test low-level fades, chosen saturated colours, fan behaviour and the console profile.

Documentation and specifications

Back to contents