Last Updated 2 weeks ago
Overview
The Godox KNOWLED MG6K is a cinema-scale bi-colour LED point source with a separate controller, G-mount optics and professional wired and wireless control. It has green–magenta correction, while remaining distinct from Godox’s full-colour R models.
MG6K is a large tunable-white source with adjustable power limiting from 10–100%. Lowering the power limit also reduces available output.
Key specifications
| Specification | Details |
|---|---|
| Capability / white range | Tunable white, 2,800–10,000K; not full RGB colour |
| Tint range | −100% to +100% G/M |
| AC input references | 4,300W at 100V/60Hz; 4,150W at 240V/50Hz |
| Power limit | Adjustable 10–100% |
| Manufacturer colour references | CRI approximately 97; TLCI approximately 97 |
| Head / controller | 24.5kg excluding U-bracket/reflector / 13kg controller |
| Head with yoke reference | 28kg on the current product page |
| Optics | G-mount; named MGR15/MGR30 and BeamLight Max configurations |
| Controls | DMX/RDM, internal CRMX, Ethernet Art-Net/sACN, Bluetooth and controller |
| Protection / temperature | IP65 head/controller; −20°C to 45°C |
Strengths and limitations
Strengths
- High-power tunable white and tint correction support large directional or bounced sources.
- Power limiting and wired/wireless/network control make the operating configuration explicit.
Limitations
- No full-colour RGB operation; the MG6K name is not a 6,000W electrical specification.
- The yoke-equipped head, large optics, separate controller and multi-kilowatt supply are substantial handling and infrastructure requirements.
Practical uses
Use it where a large white-light source must work over distance or through substantial diffusion. Plan electrical distribution and the complete lifting and support arrangement before specifying the lamp.
| Setup | How to use this fixture |
|---|---|
| Long-throw directional source | Choose the supported MGR or BeamLight Max arrangement for the required coverage. A long throw and a broad bounce are different optical jobs. |
| Large warm/cool transition | Use CCT/tint and hold the power limit and output mode consistent during programming. |
| Reduced-input configuration | Set the actual limit before exposure planning. Test the required intensity through the chosen modifier, since reducing input also affects available light. |
Output and colour
MG6K provides 2,800–10,000K white and ±100% green–magenta adjustment. Godox lists MGR15/MGR30 and BeamLight Max optics for different beam requirements. Its 6kW-HMI comparison depends on the stated optics and test conditions; working exposure also depends on distance, CCT and fan/power settings.
Sources: MG6K-Product-KNOWLED.
The manufacturer’s 6kW-HMI comparison is conditional. It does not give every G-mount optic the same coverage or exposure as every HMI configuration. Keep distance, CCT, optic, cooling and power limit with a real comparison.
MG6K’s wide white range is distinct from the MG4KR/MG2400R full-colour capability. A colour wash outside its white/tint range needs filtration or a different fixture.
Tests and reviews
CineD interviews Godox ambassador Davi Valente about the MG6K. The Godox/Andyax forest tutorial demonstrates the lamp in a manufacturer-supported production.
CineD interview with Godox ambassador Davi Valente: Read the ambassador interview.
Power and batteries
Published input is 4,300W at 100V/60Hz or 4,150W at 240V/50Hz. Use the actual controller input marking and distribution appropriate to that load. The adjustable 10–100% power limit changes the operating budget.
Set the limit before metering and cue creation. A level programmed with one limit may not produce the same exposure after the limit changes. Include the separate 13kg controller, cable system and required power accessories in the package.
Control, cooling and camera operation
| Control path | Hardware and operating notes |
|---|---|
| Local / app | Controller and supported Bluetooth operation, including the selected power limit. |
| Console | DMX512/RDM and internal CRMX. |
| Network | Ethernet Art-Net/sACN; label protocol and universe. |
| Dimming / white | Chosen curve, CCT/tint and operating mode stored with the cue. |
If a power or cooling adjustment is needed for a new setup, meter again before assuming an existing console percentage is still valid. That relationship matters particularly through a large frame or at a long throw.
Assess fan sound at the warmed working level and actual microphone position. The forest demonstration shows one use environment; it cannot establish acoustic suitability in a small quiet interior.
Modifiers, rigging and the working package
Godox lists a 24.5kg head without U-bracket/reflector, 28kg with yoke and a separate 13kg controller. Add the compatible G-mount optic, support and cables to the installed load. Listed optics include MGR reflectors and BeamLight Max accessories. Head and controller are IP65.
| Component | Published/package reference |
|---|---|
| Head, stated exclusions | 24.5kg without U-bracket/reflector |
| Head with yoke | 28kg current product reference |
| Controller | 13kg separately |
| Optic | Exact MGR/BeamLight or other supported G-mount configuration |
| Support | Fitted accessory, cable and any optic support added to the appropriate load |
Plan handling and transport around the working system, not the body alone. Fit the chosen optic, check its required support and exercise the full working tilt before raising the lamp.
Alternatives and related fixtures
| Fixture | When to compare it |
|---|---|
| Godox KNOWLED MG4K | Choose the smaller bi-colour system when its matched-coverage output is enough and reduced input/head load are useful. |
| Godox KNOWLED MG4KR | Choose full colour when the cue requires it; compare a different engine and electrical/optic package. |
What people are saying
CineD, Davi Valente interview
CineD interviews Godox product ambassador Valente about the MG6K, including efficiency and its role on larger productions. Read article.
Videos
Manufacturer production demonstration: Godox and Andyax use the MG6K to create daylight in a forest.
Manufacturer and supplier notes
In a Godox/Andyax production tutorial, the MG6K creates directional daylight in a forest scene. Watch video.
Rental and used-fixture checks
- Record the actual yoke/optic load and confirm all mounting and accessory locks.
- Check input label, selected power limit, cooling and head-cable connections.
- Match firmware/personality and verify that the programmed cues use the intended limit.
Documentation and specifications
Browse Godox lights · COB lights · all equipment.