De Sisti 316.100 Four-Leaf Rotating Barndoor

Last Updated 10 hours ago

De Sisti four-leaf barndoor with the leaves open around its round rotating frame

The De Sisti 316.100 has four hinged leaves on a rotating frame. On an F6 or F7 Fresnel, it lets you trim a strip of light off a wall, ceiling, or lens without changing where the centre of the beam lands.

Part number
316.100
Leaves
Four
Adjustment
Rotating frame

Compatible fixtures

De Sisti names 316.100 on the Super LED F6, Super LED F7 and F6 Lite T/D data sheets. The F6 and F7 have different lens diameters, so the shared accessory number is the useful detail at the rental counter. The F6 Lite sheet linked below covers the tungsten-balanced and daylight-balanced versions.

Key specifications

SpecificationDetails
AccessoryFour independently hinged leaves on a rotating frame
Ordering code316.100
Eight-way alternative316.200, a separate assembly
Colour frame317.100, a separate filter holder
Fit referenceAccessory list for the exact head and version

Setting the cut

SetupWhat to look for
Beam wider than the subjectSet spot or flood for the area you want lit, then walk in one leaf at a time. Check the opposite edge before closing the second pair.
Diagonal edgeRotate the assembly until a leaf edge follows the line you want to cut, then adjust that leaf. This keeps the head aimed at the subject.
A sharp line on a distant wallIf the leaf gives a soft edge at the wall, use a separate flag farther from the lens for a cleaner cut.

On set

For a backlight just above frame, check the shot from the camera position. Bring in the camera-side leaf until the lens clears, then have the subject move through the mark. A cut that fixes flare on a static frame can also take the light off the near shoulder.

Rental and used-gear checks

  • Read the number on the booking. The four-leaf and eight-way assemblies have similar descriptions and different order codes.
  • Move all four leaves through their range. Each should hold its position, including when the fixture is tilted.
  • Check that the frame seats in the head’s accessory holders, its retainer closes, and the frame rotates without lifting out.

Back to contents