Godox KNOWLED M1000R

Last Updated 2 weeks ago

Overview

The Godox KNOWLED M1000R is a full-colour Bowens-mount COB LED with a separate controller and green–magenta adjustment. It has its own compatible optical system and a published maximum controller input of 1150W.

M1000R is a full-colour Bowens system with a separate 1,150W-maximum controller. Its accessory package and the conflict between current IP65 advertising and an earlier IP54 manual need to be explicit in a rental order.

Key specifications

SpecificationDetails
Engine / white rangeFull colour; 1,800–10,000K, ±100% G/M
Maximum controller input1,150W; 100–240V AC
Manufacturer colour referencesAverage CRI ≥95; TLCI ≥94
Head / controllerApproximately 8.1kg / 5.6kg; stated head exclusions apply
Head dimensionsApproximately 7.8 × 7.4 × 14.53in without U-bracket/reflector
Optical interfaceBowens; model-compatible BP/Fresnel/BeamLight/soft modifiers
ControlsDMX/RDM, internal CRMX, Art-Net/sACN, Bluetooth and controller
CurvesLinear, S-curve, Exponential, Logarithmic
Ingress-reference conflictCurrent product page IP65; published earlier operating manual IP54
Temperature reference−20°C to 45°C
Key specifications

Strengths and limitations

Strengths

  • Full-colour output can be shaped with model-compatible Bowens optical accessories.
  • Internal wireless/network control supports remote heads and repeatable cues.

Limitations

  • Projection output depends on the fitted lens and is not a universal bare-source comparison.
  • Published protection ratings conflict; complete head/yoke/optic weight exceeds the bare figure.

Practical uses

Use it for a colour-capable key, bounce or projected pattern with a compatible optic. Verify the fixture revision and documentation before exterior use, since published manufacturer resources disagree about the protection rating.

SetupHow to use this fixture
Projection setupSpecify BP19K/BP26K/BP36K and its lens/focus for the actual pattern or field size. Include the required support, not just the head.
Large colour bounceSet hue and saturation first. The bare white reading is not the saturated output through the bounce.
Exterior sourceIdentify the marked revision and applicable head/controller instructions before relying on a product-page IP claim.
Lighting setups

Back to contents

Output and colour

At 5,600K/3m, Godox’s BP reference lists 4,010 lux bare and 11,600 lux with the BP 19° lens. The projection lens changes beam coverage and shadow control. The full-colour M1000R has 1,800–10,000K white and tint adjustment, with model-specific BP lenses and focusing accessories.

Mount, Photometrics and Working Configuration

Measurement conditionManufacturer illuminance
M1000R, 5,600K, BP projection attachment with 19° lens, 3m11,600 lux
Manufacturer photometrics, in lux

Mount, Photometrics and Working Configuration

5,600K configuration3m5m7m
Bare M1000R4,010 lux1,650 lux923 lux
BP projection, 19° lens11,600 lux3,740 lux1,860 lux
Manufacturer photometrics, in lux

Sources: Godox KNOWLED M1000R documentation (PDF); M1000R-Product-KNOWLED.

Godox lists 4,010 lux bare and 11,600 lux with the 19° projection configuration at 3m/5,600K. The lens concentrates and shapes the beam.

The current product page lists IP65; an older manual lists IP54. Existing fixtures need to be identified by their marked rating and corresponding manual.

Tests and reviews

Dapper Gaffer tests operation, fans, colour and power draw, and uses a Fresnel and BP26K projector. Godox supplied the review lamp and allowed the creator to keep it.

Watch the supplied-unit review and optical demonstrations.

Back to contents

Power and batteries

Maximum controller input is 1,150W from the documented 100–240V AC supply. Use the supplied controller label and operating conditions for distribution; the “1000” name is not the maximum wall input.

The 5.6kg controller remains a separate support and handling load. Include its mounting, head lead and any power accessories when comparing the whole system with an integrated-head alternative.

Control, cooling and camera operation

Control pathHardware and operating notes
Local / BluetoothController and supported app operation.
ConsoleDMX512/RDM and internal CRMX.
NetworkEthernet Art-Net/sACN with the actual protocol/universe/address.
Precision and curvesMatch colour personality, firmware and selected curve before building cues.
Control options

Select fan mode and usable brightness before a dialogue test. A Fresnel or projector setup can need a different level from the bare head, so test sound with the intended accessory and exposure.

For a projected image, inspect focus and edge behaviour across the required field. Changing lens angle or source position changes the pattern size; a single centre-lux value does not describe projection quality.

Back to contents

Modifiers, rigging and the working package

The manual lists an approximately 8.1kg head and 5.6kg controller, with the head weight excluding U-bracket and reflector. The complete rig includes the compatible BP19K/BP26K/BP36K or Fresnel, optical support and cabling. Dapper Gaffer covers Fresnel and BP26K handling in the linked review.

PartWorking requirement
Head8.1kg before stated excluded accessories
Controller5.6kg separately
Optical packageCorrect compatible BP lens or Fresnel, attachment and support
BalanceYoke and head cable exercised at working angle
Exterior useActual rating/revision and instructions established
M1000R complete working package

Inspect the projector/Fresnel attachment and front-load support during prep. Allow enough clearance for focus controls, controller access and the full head tilt after the modifier is fitted.

Back to contents

Alternatives and related fixtures

FixtureWhen to compare it
Godox KNOWLED M600RCompare a smaller Bowens full-colour package when its exposure is adequate.
Godox KNOWLED MG1200RCompare the G-mount system for a different optical inventory and higher maximum input.
Alternative fixtures

Back to contents

What people are saying

Dapper Gaffer

The review includes controls, fan operation, colour readings, measured power draw and practical use with the Fresnel and BP26K projector. The creator discloses that Godox supplied the lamp and that it did not have to be returned. Watch video.

Videos

Dapper Gaffer tests the M1000R, FLS10 Fresnel and BP-series projection attachment. The creator discloses receiving the lamp from Godox to keep.

Back to contents

Rental and used-fixture checks

  • Confirm protection and input labels on the exact head/controller revision.
  • Fit and focus the intended BP or Fresnel, checking balance and accessory support.
  • Test the required fan mode, dimming curve, colour cue and head cable.

Documentation and specifications

Back to contents