Last Updated 2 weeks ago
Overview
The Godox KNOWLED M300R is a full-colour Bowens-mount LED with a separate controller and battery-capable power options. It provides a smaller package than the M600R while retaining adjustable white light and saturated-colour operation.
M300R brings full colour and console/network control to a smaller Bowens head. Its 460W maximum input and reduced-output battery/fan-off arrangements matter more than the “300” name when planning a location setup.
Key specifications
| Specification | Details |
|---|---|
| Engine / range | Full colour; 1,800–10,000K and ±100% G/M |
| Maximum AC input | 460W; 100–240V, 50/60Hz |
| Manufacturer colour references | CRI approximately 96; TLCI approximately 95 |
| Head / controller | 3.6kg / 3.1kg, excluding stated head accessories |
| Head dimensions | Approximately 7.09 × 9.61 × 6.14in without U-bracket/reflector |
| Accessory mount | Bowens; model-compatible BR/BP/soft-light accessories |
| Controls | DMX/RDM, internal CRMX, Art-Net/sACN, Bluetooth and controller |
| Battery support | Supported V-mount arrangement; output limits depend on configuration |
| Protection / temperature | IP65 prescribed head/controller configuration; −20°C to 45°C |
Strengths and limitations
Strengths
- A relatively small full-colour head includes CRMX and network options.
- Bowens modifiers and supported battery operation provide several location configurations.
Limitations
- 460W maximum input and separate controller are a larger package than the 300W name alone implies.
- The review reports colour-score and interface limitations alongside strong reflector output.
Practical uses
Use it for coloured backgrounds, a compact key or projection with a compatible BP-series optic. Check the supported battery configuration and the required output before choosing it for a mains-free setup.
| Setup | How to use this fixture |
|---|---|
| Compact colour key | Fit the soft modifier and set the actual hue or white/tint before exposure. A narrow-reflector peak is not the transmitted key level. |
| Projected pattern | Use the exact compatible BP lens and support. The linked Threefold review shows an M300R/BP19K working package. |
| Battery interview | Choose the battery and fan configuration before setting exposure; the independent table below shows materially different results. |
Output and colour
The M300R is full colour with 1,800–10,000K CCT and ±100% tint adjustment. Godox quotes 101,000 lux at 1m/5,600K with BR30 on the product page, while the catalogue supplies a 3,880-lux reference at 5m with that reflector. Both are concentrated-reflector readings. BP projection output, bare-source coverage and saturated-colour performance require different measurements.
Mount, Photometrics and Working Configuration
| Measurement condition | Manufacturer illuminance |
|---|---|
| M300R, 5,600K, BR30 reflector, 5m | 3,880 lux |
Sources: Godox KNOWLED lighting catalogue: English; model-specific tables; M300R-Product-KNOWLED.
Godox’s catalogue lists 101,000 lux at 1m/5,600K with BR30 and a separate 3,880-lux reference at 5m. The review uses its stated test settings and distances.
A smaller head helps placement, but saturated colour, projection focus and diffusion each create a different exposure requirement. Choose the actual source configuration before deciding whether the lamp replaces a larger fixture.
Tests and reviews
Allard’s review separates battery, fan-off and High-Speed operation. All rows below use a 5,600K setting and 30° reflector at 1m. They show why the quiet or battery setup should be measured directly.
| Independent configuration | Output | Measured CCT |
|---|---|---|
| Fan Off | 9,290 lux | 5,713K |
| High-Speed mode | 97,300 lux | 5,467K |
| One 14.8V V-mount battery | 24,800 lux | 6,195K |
| Two 14.8V V-mount batteries | 54,900 lux | 6,092K |
Read the full M300R test conditions.
Power and batteries
Maximum AC input is 460W. Supported V-mount operation is a different configuration: Allard reports manufacturer limits of 30% with one 14.8V pack and 70% with two. Pack capacity alone does not remove those limits.
Use the actual controller’s approved battery arrangement and continuous-current requirements. The separate 3.1kg controller, packs, charger, clamp and head cable all belong in a portable-kit comparison.
Control, cooling and camera operation
| Control path | Hardware and operating notes |
|---|---|
| Local / app | Controller and supported Bluetooth/KNOWLED app operation. |
| Console | DMX512/RDM and internal LumenRadio CRMX. |
| Network | Ethernet Art-Net/sACN with universe and protocol recorded. |
| Personality | Full-colour mode, selected dimming curve and installed firmware matched with the desk. |
Choose cooling before final sound and exposure checks. A fan-off configuration is a reduced-output source, as the review demonstrates. Keep it distinct from the camera High-Speed mode.
For repeat cues, record the power source and white/tint result as well as intensity. The review’s battery readings show that the Kelvin display alone is not sufficient to describe the measured output.
Modifiers, rigging and the working package
The 3.6kg head and 3.1kg controller figures exclude the U-bracket and reflector. Bowens is the accessory interface, but BP projectors and Fresnels need a model-specific compatibility check. The review below uses a BP19K combination; confirm the physical fit, optical coverage and support on the actual order. The specified head/controller protection is IP65 with the prescribed connections.
| Part | Working requirement |
|---|---|
| Head | 3.6kg before stated excluded U-bracket/reflector |
| Controller | 3.1kg before batteries |
| Optics | Exact compatible BR reflector, BP projector or soft modifier |
| Support | Yoke, front accessory support, clamp and head-cable slack |
| Weather arrangement | Prescribed connected IP65 configuration |
Fit a projector or deep softbox before assessing balance and tilt clearance. A standard Bowens interface does not by itself establish thermal, optical or support compatibility for every accessory.
Alternatives and related fixtures
| Fixture | When to compare it |
|---|---|
| Godox KNOWLED M600R | Choose the larger full-colour M600R when extra exposure is useful, allowing for its larger working head/controller. |
| Godox KNOWLED M600Bi Pro | Choose bi-colour Pro if saturated colours are unnecessary and its communications match the job. |
What people are saying
Matthew Allard ACS, Newsshooter
Allard praises output, manageable size, open-face CCT accuracy and saturated colours. His reservations are lower-than-expected TLCI and SSI scores, and a basic app and interface. Read article.
Caleb Hauff, Threefold Creative Studio
Hauff reviews the M300R with the BP19K projector and says Threefold uses and rents that equipment. The video provides a working-user perspective on the smaller fixture and optical package. Watch video.
Videos
Threefold Creative Studio uses the M300R with a BP19K projector.
Rental and used-fixture checks
- Check the controller battery arrangement at the required output and record the limit.
- Fit the exact BP/Fresnel/softbox and inspect the Bowens lock and yoke.
- Test low-level fades, chosen saturated colours, fan behaviour and the console profile.
Documentation and specifications
- M300R-Product-KNOWLED
- Godox KNOWLED lighting catalogue: English; model-specific tables
- Nanlite Forza 300B II
Browse Godox lights · COB lights · all equipment.