Last Updated 2 hours ago
Overview
An 11-inch cell fits where the backing turns a corner and a straight strip would bridge the curve. One lamp and one circuit let the crew trim that patch of wall independently.
Key specifications
| Specification | Type 2771 |
|---|---|
| Lamp positions | One cell, up to 1,000 W each |
| Head length | 11 in. |
| Maximum connected load | 1,000 W, all cells at 1,000 W |
| Factory circuit options | 1 |
| Filter-frame holders | 1 × Type 27320 (1-cell) |
| Reflector | Molebrite Alzak aluminium in each cell |
| Lamp socket | Double-ended, recessed single-contact |
Circuit versions
| Circuits | Cells per circuit | Maximum per circuit | Current at 120 V | Head weight¹ |
|---|---|---|---|---|
| 1 | 1 | 1,000 W | 8.3 A | 3 lb |
¹ Bare head. Mole also lists a 3½ lb version of the 2771 with interconnecting leads at both ends.
Replacement lamps
| Lamp codes | Per lamp | Supply | Rated colour | Current per lamp |
|---|---|---|---|---|
| FCM / FHM | 1,000 W | 120 V | 3,200 K | 8.3 A |
| EME / EMF | 800 W | 240 V | 3,200 K | 3.3 A |
| EJG / EMD | 750 W | 120 V | 3,200 K | 6.3 A |
| FDF / FDN | 500 W | 120 V | 3,200 K | 4.2 A |
| FCL / FCZ | 500 W | 120 V | 3,000 K | 4.2 A |
| EHM / EHZ | 300 W | 120 V | 2,950 K | 2.5 A |
Mole specifies a T-3 lamp, 4 11/16 in. overall, operated horizontally within 4°. EME and EMF are the 240 V pair. For examples of these lamp codes in other heads, see FCM · EMD · FDN · FCZ.
Strengths and limitations
- The 11-inch body fits between longer strips on a curved return. The single lamp gives one independently dimmable colour.
- With 1 × 500 W FCL lamp, the connected load is 500 W. Gel choice and distance from the backing determine how much light reaches the wall.
Practical uses
At the end of a long run, bring the single up against the neighbouring unit and look for a bright seam before adding gel. The short body can follow a curve in smaller steps.
Output and colour
Mole’s strip specification lists the lamps and circuit loads. It gives no measured foot-candles at a stated wall height or setback for the Type 2771. Take readings up the wall, then halfway between adjacent heads to check overlap.
Power and controls
The Type 2771 has no onboard switch. Mole specified 36-inch leads for each circuit and offered different plugs. The single feed follows one dimmer.
Optics and mounting
Each filtered cell takes one Type 27240 Molequik frame. The single-cell front holder is Type 27320. Mole lists the Type 26530 bracket pair for floor use and the 26120 end hangers for pipe mounting. Its removable front holder increases the fixture profile to 13⅛ in. high by 12¾ in. deep. Manufacturer’s accessory drawings.
Comparable fixtures
The two-light Type 2661 covers a longer straight section and was available with separately fed cells. Compare model lengths and circuits. For a dedicated floor unit, see the Type 3371 Groundrow.
Field coverage and further reading
Mole’s rental catalogue lists the Type 2771 by both model and lamp count. It also lists the frame and floor-bracket or hanger package. Mole-Richardson rental catalogue, Cycs.
Rental and used-fixture checks
The regular head weighs 3 lb. Mole also lists a 3½ lb version with a lead at each end. Check which one the rental house is sending.
Documentation
- Mole-Richardson Molorama specification and lamp tables (PDF)
- Manufacturer’s Molerama series page and colour layouts
- Molorama filter holders and mounting hardware
Back to contents · Mole-Richardson fixtures · Tungsten lights