Rosco DOT Round Diffuser for DMG DASH

Last Updated 10 hours ago

Rosco DOT Round Diffuser for DMG DASH

The DOT is a collapsible silicone half-globe that fits one DMG DASH. Seen from the front, it turns the pocket light into a small round source. Its shape is particularly useful when the lamp itself appears in a shot or its reflection shows up in an eye, a bottle or polished metal.

Product number
29822500A111
Fixture
DMG DASH
Attachment
Magnetic

Compatible fixtures

The magnetic base attaches to the front of a single DASH. Rosco’s Pocket LED Kit already includes flat and dome diffusers, an eggcrate and a gel holder. The DOT is a separately ordered accessory with its own fabric bag. On a Quad Kit, each DOT still covers just one of the four lights.

Key specifications

SpecificationDetails
Product number29822500A111
Host fixtureRosco DMG DASH
Material and attachmentFlexible silicone half-globe, magnetic front fitting
Packed formCollapses flat into the supplied bag

Choosing the shape of a reflection

With a glass bottle, the outline of the source is often more important than the level on the label. Turn the DOT toward the bottle, watch from the taking lens and move it until the bright spot clears the lettering. The included flat diffuser gives a rectangular reflection when that better describes the bottle’s shape.

Practical uses

For an eye light, start just outside the frame near the lens axis and watch the catchlight at the final focal length. If the reflection is right but the nose or cheek gets too much fill, trim the level on the DASH. For an on-screen practical, expose the dome as part of the set and check the colour on camera.

Rental and used-gear checks

  • When collecting a used DASH kit, ask specifically for the DOT.
  • A listing that says “dome diffuser included” may refer to the standard piece.
  • Check that the silicone opens evenly, the base seats all the way around and the bag keeps dust off the surface between setups.

Back to contents