Last Updated 2 weeks ago
Overview
The Aputure MC Pro is a compact RGBWW light with an internal battery, magnetic mounting and a magnetic modifier system. It is a small accent or close-working light, with different optics, charging arrangements and controls from the original MC.



The MC Pro is a compact accent light with internal CRMX, a built-in battery, passive cooling and interchangeable magnetic diffusers and grid.
Key specifications
| Specification | Details |
|---|---|
| CCT | 2,000–10,000K |
| Maximum LED output / consumption | 5W / 7W |
| CRI / TLCI | 96 / 96 in the product specification table |
| Internal battery | 4,200mAh; approximately 15.5Wh |
| Runtime at maximum output | Approximately 120 minutes |
| Charge input / time | USB-C 5V/2A; approximately 90 minutes |
| Weight / dimensions | 247g; 108 × 70 × 25mm |
| Ingress rating / cooling | IP65 / passive |
| Wireless control | Built-in CRMX and Sidus Link Bluetooth Mesh |
Strengths and limitations
Strengths
- Internal battery, CRMX and small magnetic modifiers form a compact accent-light package.
- Passive cooling is useful near dialogue microphones.
Limitations
- Short working distance and modifier losses limit its role as a larger-area source.
- Wired DMX needs an adapter, and magnetic holding depends on the mounting surface.
Practical uses
Use it for a hidden practical accent, a small product highlight or a touch of fill at close range. Test the magnet on the actual surface and add appropriate secondary support when required; a magnetic attachment is only as dependable as the complete mounting arrangement.
| Setup | How to use this fixture |
|---|---|
| Product or detail highlight | Use the bare lensed source or grid for a small controlled highlight. Inspect reflections on glossy materials; a tiny bright source produces a different reflection from the dome. |
| Eye light or close fill | Fit the flat or dome diffuser and establish the level at the real working distance. The output reduction is substantial compared with the bare panel. |
| Hidden coloured practical effect | Pair by CRMX or Sidus Link before concealment. Leave access for charging or provide a sufficiently charged spare when the light is dressed into a difficult location. |
Output and colour
The MC Pro's lensed output is strongly affected by its magnetic modifiers: at 1m and 5,600K Aputure lists 396 lux bare, 177 with the flat diffuser and 98 with the dome. The 30° grid controls spill and is listed at 331 lux. These white-light readings do not establish saturated-colour output. At close distances it can make a useful product highlight, eye light or concealed accent.
Measured Output at 5,600K
| Configuration | 0.5m | 1m |
|---|---|---|
| No diffuser | 1,585 lux | 396 lux |
| Flat diffuser | 706 lux | 177 lux |
| Dome diffuser | 392 lux | 98 lux |
| 30° grid | 1,322 lux | 331 lux |
Sources: MC Pro Product Manual V1.0; MC Pro | Aputure.
At 1m/5,600K the official flat-diffuser result is about 45% of the bare reading, and the dome about 25%. These calculated ratios describe those published configurations. Choose the modifier for the reflection and spill required, then set exposure with it fitted.
The 30° grid primarily controls spill, while the dome changes the source’s emission pattern. They solve different problems. White-mode output and a high colour-rendering score do not establish the brightness of a deeply saturated cue.
Tests and reviews
New Layer reviews the redesigned magnetic modifiers and the removal of the original MC’s Qi charging. Wes Perry provides a separate review with light-testing resources.
Watch New Layer’s MC Pro review and Wes Perry’s assessment.
Power and batteries
Maximum consumption is 7W, separate from the 5W LED rating. The internal battery is approximately 15.5Wh, with a manufacturer runtime reference of about 120 minutes at maximum output. Battery age and the chosen operating condition affect the practical result.
USB-C charging is specified at 5V/2A, with approximately 90 minutes quoted under the stated conditions. The original MC’s Qi charging arrangement does not carry over. Specify the Pro’s correct charging accessories and any kit charging case.
Control, cooling and camera operation
| Control path | Hardware and operating notes |
|---|---|
| Wireless console | Internal CRMX; pair and label the light before hiding it. |
| Wired console | Active USB-C DMX adapter required. An ordinary charging cable is not a DMX interface. |
| App / local | Sidus Link Bluetooth Mesh and onboard controls. |
| Precision | Supported 16-bit DMX control; match the downloaded chart and firmware to the chosen console personality. |
Passive cooling avoids fan noise near a microphone, but a concealed lamp still needs ventilation. Test the actual low-end cue and return from zero on camera; tiny practical accents can show a visible step even when the overall room exposure barely changes.
Wired DMX uses the USB-C adapter. Plan the adapter, power and charging connections together before fitting the light into a concealed position.
Modifiers, rigging and the working package
The mounting thread and suitable adapters provide positive attachment. Magnets need a suitable ferrous surface, with secondary support for overhead positions. A complete kit includes the flat diffuser, dome, grid, USB-C cable and required DMX adapter.
| Package part | Size or purpose |
|---|---|
| Light | 247g; 108 × 70 × 25mm |
| Magnetic modifiers | Flat diffuser, dome and 30° grid as required |
| Positive mounting | Threaded attachment or suitable adapter for the actual position |
| Console accessory | Active USB-C DMX adapter if wired control is required |
| Charging | USB-C supply/cable or the appropriate Pro charging case |
Magnets depend on a suitable ferrous surface and the actual paint, angle and contact area. Use a positive attachment and appropriate secondary support where required by the position. Keep small magnetic modifiers accounted for separately in a multi-light kit.
Alternatives and related fixtures
| Fixture | When to compare it |
|---|---|
| Aputure Accent B7c | Choose a screw-in practical bulb when the source needs to live inside an E26/E27 lamp. |
| Aputure Light Storm LS 60d | Choose a focusing daylight head for greater reach and barn-door control, allowing for external power and support. |
What people are saying
New Layer
New Layer favours the redesigned magnetic diffusers and grid. The review also notes increased output and control options, alongside the removal of the original MC’s Qi charging. Watch video.
Wes Perry
Perry examines how far the Pro changes the original MC formula and includes light-testing resources with his review. It provides another perspective on whether the additional features justify choosing the Pro. Watch video.
Videos
New Layer reviews the MC Pro and its magnetic modifiers.
Rental and used-fixture checks
- Check battery capacity under load and the USB-C socket.
- Account for all magnetic modifiers and test the actual mounting surface.
- Verify the active DMX adapter or CRMX link and the firmware/profile used for fades.
Documentation and specifications
Browse Aputure lights · pocket lights · all equipment.