Godox KNOWLED M600D

Last Updated 2 weeks ago

Overview

Godox KNOWLED M600D

The Godox KNOWLED M600D is a fixed-daylight Bowens-mount COB LED with a separate controller and supported battery-power options.

M600D is the fixed-daylight original M600 option for reflector, Fresnel, bounce and diffusion work. Its 740W maximum input and external wireless-DMX requirement should remain separate from newer R/Pro specifications.

Key specifications

SpecificationDetails
Engine / CCT600W-class daylight COB; fixed 5,600K
Maximum electrical input740W
Manufacturer colour referencesCRI ≥96; TLCI ≥97
Reference output164,000 lux at 1m/5,600K with standard reflector
Optical interfaceBowens; compatible FLS10/soft modifiers
Head / controllerApproximately 4.5kg / 3.987kg
Head dimensions447.3 × 242.8 × 152.9mm
Power arrangementsAC and supported V-mount operation with model-specific output limits
ControlsDMX512, Godox 2.4GHz and Bluetooth; external CRMX receiver
Temperature reference−10°C to 40°C
Exposure guidanceOriginal manual requires dry use; do not borrow a newer model’s IP rating
Key specifications

Strengths and limitations

Strengths

  • A fixed-daylight head provides a simple source for bounce, diffusion or the listed Fresnel.
  • Separate control and supported camera batteries provide alternative deployment options.

Limitations

  • Warm matching requires gel or another fixture.
  • External CRMX, battery limits and mute output must be included in a complete package decision.

Practical uses

Use it for daylight bounce, diffusion or a controlled beam with the appropriate Fresnel. For a used package, inspect the controller, head cable and battery equipment as carefully as the lamp head.

SetupHow to use this fixture
Daylight bounceChoose reflector coverage to illuminate the useful bounce surface. The subject’s exposure depends on the full bounce arrangement.
Focused accent or window lightUse the compatible FLS10 and set focus for the required area before adjusting level. A Fresnel spot and bare COB are different sources.
Warm sceneAllow for colour-correction gel and its transmission loss, or compare a bi-colour option if frequent changes are needed.
Lighting setups

Back to contents

Output and colour

M600D is fixed at 5,600K. Godox lists 164,000 lux at 1m with the standard reflector. The compatible FLS10 provides adjustable focus; bounce, diffusion and correction gel change the resulting exposure. Controls and connections belong to the original M600D generation.

Sources: knowled M600D; Godox KNOWLED lighting catalogue: Chinese; model-specific tables.

The 164,000-lux figure is measured at 1m with the standard reflector. Bare-head, 3m and broad soft-source readings describe different conditions.

Tungsten matching requires correction gel, with a corresponding exposure loss. Compare the complete corrected or diffused source at the working distance.

Tests and reviews

Rob Hall’s 2022 review compares fan noise, size and power use. Art Video Productions demonstrates the FLS10 and discloses a supplied review unit.

Watch Hall’s comparison and the supplied-unit operating workshop.

Back to contents

Power and batteries

Maximum consumption is 740W, separate from the 600W engine class. Supported V-mount operation depends on the original controller’s battery, cooling and discharge conditions. Demonstrate the required output on the actual battery arrangement before leaving prep.

The original manual specifies 14.8V or 26V battery operation, including which side supports unilateral supply. The controller’s marked arrangement identifies the correct connection.

Control, cooling and camera operation

Control pathHardware and operating notes
Local / appOnboard/controller operation and supported Bluetooth app.
Handheld systemGodox 2.4GHz remote.
ConsoleDMX512; external receiver for CRMX reception.
DimmingLinear, S-curve, Exponential or Logarithmic; retain the curve with the cue.
Control options

Mute mode and maximum-reflector output are not automatically the same configuration. Establish the quiet operating level before setting exposure and testing dialogue sound.

For low-level cues, test the selected dimming curve and production shutter setting through the final modifier.

Back to contents

Modifiers, rigging and the working package

Published weights are approximately 4.5kg for the head and 3.987kg for the controller. The complete kit also includes the compatible FLS10/Bowens modifier, yoke, controller clamp and head cable, with battery and optical support as required. Inspect the accessory interface, cable strain relief and the unit’s marked protection rating.

PartWorking requirement
HeadApproximately 4.5kg before accessories
ControllerApproximately 3.987kg before battery load
OpticsCorrect FLS10 or Bowens modifier and support
WirelessExternal DMX receiver and its power when needed
CablesCorrect head lead, controller clamp and strain relief
M600D original working package

Inspect the optic interface, yoke, controller clamp and cable connectors. The original manual specifies dry-use operation.

Back to contents

Alternatives and related fixtures

FixtureWhen to compare it
Godox KNOWLED M600BiChoose bi-colour adjustment if changing gels between tungsten and daylight would slow the job.
Aputure Light Storm LS 600d ProCompare another daylight Bowens package by reflector coverage, full component weight and communications.
Nanlite Forza 500 IICompare the Forza's tint adjustment, cooling and battery arrangements at the same beam coverage.
Alternative fixtures

Back to contents

What people are saying

Rob Hall

Hall positions the M600D against other high-output daylight COB fixtures and includes fan noise, size and power comparisons. The review dates from 2022, so its pricing and flagship descriptions are historical. Watch video.

Art Video Productions

The extended workshop includes the FLS10 and barn doors as well as operation. The creator says the product was received in exchange for a review, while stating that the content was not paid for or subject to outside approval. Watch video.

Videos

Rob Hall examines the M600D, its cooling, power and accessories.

Back to contents

Rental and used-fixture checks

  • Check the exact controller's input and battery settings under the intended load.
  • Fit the FLS10 or softbox and check yoke and Bowens retention.
  • Listen to fan/mute operation after warm-up and test dimming with the intended shutter.

Documentation and specifications

Back to contents