Dedolight DLED30-D

Last Updated 5 hours ago

Overview

Dedolight DLED30-D fixture

The Dedolight DLED30-D is a large daylight focusing LED with a 320W published power reference and 1200-size optics. It serves studio and larger location work, including projection and reflected lighting.

Product views: Dedolight California. Select an image to enlarge.

It is a much larger support and transport package than the DLED10 despite a similar wattage class. Versions place the DT30 controller separately or on the studio rig. Confirm the actual arrangement before ordering support.

Key specifications

SpecificationDetails
SourceLED with aspheric focusing optics
Power reference320W published system reference
Colour / white-light range5,600K
Native beam4–65°
Optical accessory family1200
CoolingActive liquid/fan cooling system
Weight referenceApprox. 26lb head reference; controller separate; excludes the complete rig
ControlMatched external controller; console capability depends on the supplied electronics
Working packageHead, fitted optics, support, appropriate power electronics and cables; battery/AC accessories depend on configuration
Source: Dedolight California product documentation. Beam settings and electrical ratings are model-specific.

Strengths and limitations

Strengths

  • Wide native focusing range.
  • Large-format projection and beam attachments.

Limitations

  • Heavy head and separate electronics.
  • Fixed daylight output and active cooling.

Back to contents

Practical uses

SetupWorking approach
Studio keyChoose field size before comparing the 65° flood and 4° spot.
Large projectionSpecify DP1200 optics, lens and shutter/gobo module.
Distant reflectionAlign the approved beam attachment and check the subject’s complete working area.

Set the head position for the direction and shadow first, then choose focus and accessories for coverage. A sharp gobo or precisely shuttered image needs imaging optics; closing barn doors around a small spot does not create the same optical result.

Back to contents

Output and colour

At 10ft, Dedolight California publishes 1,300 lux in flood, 18,000 lux in spot and 26,500 lux with the DPBA-L18. These are manufacturer/distributor configuration readings, not independent tests. The concentrated settings illuminate less area. Compare the desired field rather than choosing the largest centre reading.

For a useful comparison, record colour setting or lamp, dimming level, optic, focus position, distance and illuminated area. Measure after diffusion or reflection when that is the working setup. Wattage, centre intensity and coverage describe different parts of the result.

Back to contents

Power and batteries

Order the matched head, controller, head cable and mains cable as a complete system: DT10 for DLED10-D, DT10-BI for DLED10-BI and DT30 for DLED30-D. Studio-mounted and separate-controller versions need different support and access plans.

These larger packages are normally supplied from AC through their controller. A portable power station must support the complete continuous AC load as well as the desired runtime. Use the actual input label for distribution planning and retain access to the electronics when the head is raised.

Back to contents

Control, cooling and camera operation

Control pathOperating notes
LocalIntensity at the matched controller; CCT adjustment on the bi-colour model.
ConsoleThe specified DT10/DT10-BI/DT30 package includes DMX. Confirm connector condition, address and available personality.
Camera/soundCheck active cooling after warm-up. Test low-level dimming and the intended high-frame-rate/shutter combination before recording.

Cooling reference for this head: Active liquid/fan cooling system. Listen to the complete working package, including its controller or ballast, rather than checking only the head.

Back to contents

Modifiers, rigging and the working package

ItemCompatibility and working notes
Accessory family1200-size optics; these are a different scale from DP400/A-size.
ProjectionDP1200-family lens and approved shutter/gobo/iris assembly.
Beam controlModel-specific barn doors and wide-angle/parallel-beam attachment.
SupportInclude the optic, cable pull and controller arrangement in the working load.

Aspheric focusing optics are different from a conventional Fresnel. Check the actual accessory’s compatibility list, locking method and lens choice. A brand name or similar front diameter is not enough to establish fit.

Fit the intended front accessory before choosing the stand position. Check tilt clearance, balance, cable movement and independent support for any external electronics. Use the documented mounting hardware and appropriate secondary retention for the installation.

Back to contents

Alternatives and related fixtures

FixtureReason to compare
Dedolight DLED10-DLarger daylight package than compact DLED heads. 300W class; product detail lists 308W; A-size optical system.
Dedolight DLH1200DLarge daylight source with wide-to-tight focus. 1,200W lamp class; 1200-size optical system.
Dedolight DLED10-BITunable white in the larger A-size optical system. 220W light-engine class; published maximum power 245W; A-size optical system.

Classic Dedolight DLH4: the original low-voltage tungsten alternative with a separate supply. Compare the full power and accessory package, rather than the bare-head price.

Back to contents

What people are saying

Manufacturer and distributor demonstrations

Dedolight Lightstream: parallel-beam intensifiers. The reflected-light method is demonstrated; DLED30-specific optics and readings are listed above. View the demonstration.

Back to contents

Videos

Dedolight Lightstream: parallel-beam intensifiers. The reflected-light method is demonstrated; DLED30-specific optics and readings are listed above.

Watch the demonstration on Vimeo.

Back to contents

Rental and used-fixture checks

  • Verify controller and cable models against the exact head.
  • Operate the full focus travel with the intended front optic fitted.
  • Inspect cooling, mounting hardware, accessory retention and all cable contacts.

Confirm availability of service and replacement parts with the relevant supplier before buying older equipment. Check the actual kit contents against the shot: a missing controller, imager, lens or cable can matter more than a low head-only price.

Back to contents

Documentation and specifications

Product photographs: Dedolight California. Published specifications describe the referenced configuration; check the markings and instructions of the actual head, controller and fitted accessories.

Back to contents