Fiilex P360 Pro

Last Updated 6 hours ago

P360 Pro Overview

Front of the Fiilex P360 Pro with four-leaf barndoors
Fiilex P360 Pro rear OLED display and local knobs
Rear controlsFiilex P360 Pro rear OLED display and local knobs.
Fiilex’s AC adapter and cable reference for the P360 Pro, also shared with the Pro Plus and Classic. Image: Fiilex.
AC adapter and cableFiilex’s AC adapter and cable reference for the P360 Pro, also shared with the Pro Plus and Classic. Image: Fiilex.

The P360 Pro is a small tunable-white point source with local controls and two-channel DMX for intensity and CCT. Its 65° native field narrows with either of the optional Fresnels.

Detail photo

  • Tunable-white Dense Matrix LED
  • 90 W maximum AC / 80 W maximum DC
  • Colour Temperature 2,800–6,500 K continuously variable
  • Weight 0.8 kg as rounded by Fiilex
  • Beam Angle 65° bare; 33° with the 2-inch Fresnel, 12° with the 5-inch
  • IP Rating IP24 lamphead only; verify the complete package. Read the IP rating guide.

Jump to Output Calculator ↓

P360 Pro Specifications

SpecificationDetails
Manufacturer and modelFiilex P360 Pro
Source or rated power90 W maximum AC
Optics, colour or format2,800 to 6,500 K, two-channel DMX
Head or system detail0.8 kg, 12 to 30 V DC

Output Calculator

Select the published setup and a manufacturer distance, or enter a custom throw where supported. The results describe centre-beam output, not the brightness across the whole beam.

Camera Settings

If the calculator does not load, use the published photometric table or source on this page. JavaScript is required.

F-stop is a planning estimate, not a meter reading. It uses direct, on-axis illuminance and includes only the optics and diffusion named in the selected setup. Meter on set to account for lens transmission, filters, added diffusion, bounce, dimming and ambient light.

How the exposure estimate works

N = √(E × ISO × t / C), where E is illuminance in lux and t = shutter angle ÷ (360 × fps). The default C = 340 is a dome reference; C = 250 is a flat reference. These are calibration constants, not a measured T-stop. A small nonzero digit is tenths of a stop above the displayed full stop.

Distance estimates and comparisons

Published points are used as given. Between published points the calculator fits a curve through the two nearest readings. Outside those points it uses the inverse-square law only when the fixture’s dataset permits it. Distances outside a configuration’s supported range are reported separately. Comparisons use one shared distance and camera setup; equal lux does not imply equal coverage.

Strengths and Limitations

  • Two-channel DMX keeps a small tunable-white rig simple to patch.
  • Coloured effects require gels or another head.

Practical Uses

Use the 2-inch Fresnel for an interview back edge, or the narrower 5-inch attachment to pick a small area from farther back.

Output and Colour

ConfigurationDistanceLuxFoot-candles
5,600 K · Native 65°1 m3,146292
5,600 K · Native 65°3 m35032.5
5,600 K · Native 65°5 m12611.7
5,600 K · 2-inch Fresnel 33°1 m7,009651
5,600 K · 2-inch Fresnel 33°3 m77972.4
5,600 K · 2-inch Fresnel 33°5 m28026
3,200 K · Native 65°1 m2,570238.8
3,200 K · Native 65°3 m28626.6
3,200 K · Native 65°5 m1039.6
3,200 K · 2-inch Fresnel 33°1 m5,724531.8
3,200 K · 2-inch Fresnel 33°3 m63659.1
3,200 K · 2-inch Fresnel 33°5 m22921.3

Photometric source and test conditions.

The manufacturer’s chart provides separate 3,200 K and 5,600 K readings for the named optical configurations at 1, 3 and 5 m. Lux values are transcribed from that chart; foot-candles are converted from lux. The calculator is bounded to 1–5 m, with intermediate values labeled as estimates rather than additional factory measurements. These readings do not establish output at other colour temperatures or with different accessories. The chart does not separately identify AC versus DC operation for the photometric test.

The specifications also list a 5-inch Fresnel option at 12°, but this sheet supplies no illuminance table for that accessory. No 12° calculator configuration is inferred.

Power and Batteries

The Pro supports a 12 to 30 V DC input. Its two-channel DMX arrangement gives you one channel for intensity and one for colour temperature.

Control, Cooling and Camera Operation

The two DMX channels control intensity and colour temperature. Check that the kit has the TRRS DMX adapter you need to connect to the console. When booking a used unit, verify the exact Pro label and the appropriate DMX cabling; the P360EX and Pro Plus are distinct fixtures.

Modifiers, Rigging and the Working Package

Fiilex lists 33° with its 2-inch Fresnel and 12° with the 5-inch lens. Ask for the correct diameter on the rental order.

Alternatives and Related Fixtures

For another compact tunable-white spot, see Aputure LS 60x.

What People Are Saying

The Fanshawe College equipment catalogue documents a three-head P360 Pro kit with stands, barndoors and three dome diffusers. That shows what was packed for loan, not how the lights performed on set. Hands-on reports for the Pro Plus do not establish how this two-channel Pro performs.

Field Feedback at a Glance

The Fanshawe equipment list below verifies that the P360 Pro was supplied in a three-light teaching kit. The control and optical checks come from Fiilex’s exact P360 Pro datasheet, not reviews of the EX or Pro Plus.

What works

  • Fine white balance without swapping gels. The P360 Pro adjusts between 2,800 and 6,500 K continuously. That lets you match a nearby practical rather than jumping between two white modes.
  • One head, three listed beam angles. Use the 65° bare head or the 33° and 12° Fresnel accessories for a more controlled key or edge.
  • A small kit can cover a few lighting positions. Fanshawe’s three-head loan package included a dome and barndoors for each head. Confirm that the rented case is equally complete before packing.

Drawbacks to plan for

  • It is not the Pro Plus. Wired DMX is two channels for intensity and colour temperature on the Pro. There is no separate green/magenta setting like the one shown for the Pro Plus.
  • Bring the correct control cable. The DMX connection is TRRS, not a full-size fixture XLR jack. Check the Fiilex adapter and controller wiring before you patch the light.
  • Plan the power source and weather protection separately. Fiilex lists a maximum of 90 W on AC or 80 W on DC. The IP24 rating applies to the head, not automatically to the adapter or battery connection.

Videos

In this AbelCine NAB 2017 trade-show video, Ian McCausland speaks with Fiilex’s Brent Siebenaler about the P360 Pro and P360 Pro Plus. The demonstration covers both models; the green–magenta offset they discuss is a Pro Plus feature.

Rental and Used-Fixture Checks

Joe Sutherland’s three-head rental kit contains the P360 Pro Plus. Specify the original P360 Pro when comparing that package with this head.

Check that the label reads P360 Pro. The EX and Pro Plus have different controls. Confirm the correct Fresnel and battery lead are in the case.

Documentation and Specifications

Back to contents · Browse all lighting equipment