Last Updated 5 hours ago
Overview
The FreeStyle Mini gives a small soft face with Kino Flo’s colour controls and a removable louvre. The separate controller is useful when the head is tucked into a set or mounted above a car interior.
Choose the Mini for a compact soft source in a tighter rig than the FreeStyle 21. The head, twist-on mount, extension cable and FreeStyle 120 controller are separate parts of the system.
- FreeStyle Mini LED Panel Compact full-colour soft source with a separate controller.
- 100 W FreeStyle 120 Controller LED-120X accepts 100–240 V AC or 18–36 V DC; 4.2 A at nominal 24 V.
- Colour Temperature2500–9900 K Tunable white with green–magenta, colour and gel modes.
- Weight 1.6 kg (3.5 lb) fixture; 1.8 kg (4 lb) separate controller. Add the mount and cable for the working package.
- Beam Control Removable 90° louvre. The optional 40° SnapGrid fits the matching SnapBag, not the bare head.
- No Published Numeric IP Rating Kino Flo’s product page and operating manual do not specify a numeric rating. How to Read an IP Rating.
Key specifications
| Specification | Details |
|---|---|
| Manufacturer and model | Kino Flo FreeStyle Mini |
| Source or rated power | Compact full-colour LED panel |
| Optics, colour or format | 2,500 to 9,900 K |
| Head or system detail | 100 W controller, AC or 24 V DC |
Photometric Output Calculator
Estimate centre-beam illumination and the corresponding camera aperture from this fixture’s published measurements.
Estimated output
Select a configuration to calculate.
Manufacturer readings are for the stated optic, colour setting and full output, measured at the beam centre. Values between measured distances are interpolated. Point-source values outside those distances are approximate inverse-square estimates; large sources cannot be reliably extrapolated and are limited to their measured range. Exposure uses frame rate, shutter angle, ISO and the selected incident-meter calibration. Only the optics and diffusion explicitly listed in the measurement are included; additional modifiers, bounce, beam edges, ambient light, ND filters and camera exposure-index differences are not accounted for. Confirm critical exposures on set with a meter. Photometric source
Where the Mini Fits
The CFX-F10 is the complete Mini fixture with louvre. Kino Flo lists the PAN-F10 as the panel component, so the two listings do not describe the same working package. The Mini’s separate LED-120X controller can also operate two Mini fixtures at the same settings, according to Kino Flo. If the two heads need independent colour or dimming, specify independent control when booking.
Strengths and limitations
- Keeping the controller separate makes the head easier to conceal.
- The cable, controller and mounting plate all need to be part of the working kit.
Working with the FreeStyle Mini
Put the panel above a side window and use the louvre to keep the dashboard darker. Remove it when the shot needs more wrap and spill is acceptable.
Output and photometrics
| Metres | Lux | Feet | fc |
|---|---|---|---|
| 0.5 | 3,060 | 2 | 195 |
| 1 | 828 | 4 | 54 |
| 1.5 | 380 | 6 | 24 |
| 2 | 219 | 8 | 14 |
| 2.5 | 142 | 10 | 9 |
| 3 | 99 | 12 | 6 |
| 3.5 | 73 | 14 | 5 |
| 4 | 57 | 16 | 4 |
| 4.5 | 45 | 18 | 3 |
| 5 | 37 | 20 | 2 |
Kino Flo manufacturer photometric table.
The manufacturer chart does not identify the CCT, dimmer setting or louvre configuration. The calculator uses all ten metric readings over 0.5–5 m, with interpolation between published points. The separately reported imperial series is not merged into that curve. These measurements do not establish modifier losses or colour-specific output.
Choose the Mini Modifier
Start with the removable 90° louvre if you need to contain spill from a shallow rig. If you want a softer reflected edge, plan for the matching SnapBag and diffusion; the 40° SnapGrid controls spill on that bag rather than replacing the louvre on the head.
Power and controls
The LED-120X controller accepts 100–240 V AC or nominal 24 V DC (18–36 V input range) through a 3-pin XLR. Its documented ambient operating range is −10 to +40°C. Two X08-F125 extensions allow up to 50 ft between controller and head. CCT, hue/saturation, gels and RGB controls cover white and coloured setups. See the Kino Flo operating manual, revision D.
Optics and mounting
A removable louvre attaches to the head. The twist-on mounting plate lets the crew reposition the head while leaving the controller off the stand. The DFS-FS10-S SnapBag accepts the LVR-FS140-S 40° SnapGrid; Kino Flo specifies that this grid requires the matching SnapBag and is not designed for use on its own. See the manufacturer’s accessory instructions, page 10.
Comparable fixture
For a larger FreeStyle head, see Kino Flo FreeStyle 21 or compare the longer FreeStyle 31.
Field coverage and further reading
Rental and used-fixture checks
Verify that the case includes the Mini head, head extension, twist-on mounting plate and compatible controller. Inspect the louvre attachment before placing it overhead.
Before You Book
Ask for the complete Mini system rather than just a replacement panel. On a fixture you need to swap between locations, confirm the correct KinoGrip mount, extension length, power cable and control method together. If the shot depends on a particular dimmer level, colour or louvre setup, meter that setup: Kino Flo’s published chart does not identify those conditions.


