Last Updated 10 hours ago

The FL-35E lets the operator change the width of an Evoke beam after the fixture has been placed. From a high window position, that can mean widening the pool for the master and tightening it for a close-up from the console. The motor changes focus. The rotating barn doors still need a hand at the lamp.
- Model
- FL-35E
- Motorized zoom
- 15° to 46°
- Lens weight
- 10 kg
Compatible fixtures
Nanlux’s Evoke accessory matrix lists the FL-35E for the 2400B. It also lists the 5000B with the lens limited to 2,400 W. The same matrix excludes the 900C, 1200 and 1200B from the motorized FL-35E pairing. The manual FL-35YK is a different order for those heads.
Key specifications
| Specification | Details |
|---|---|
| Interface | Electronic NL mount on the compatible Evoke head |
| Focus range | 15° spot to 46° flood |
| Control options | Lens controls, lamp menu, wired controller, NANLINK or DMX |
| Lens weight | 10 kg |
| Supplied beam control and transport | Rotating barn doors and trolley case |
Output on the Evoke 2400B
Nanlux gives a spot reference of 75,700 lux at 3 m with the 2400B set to 5,600 K and the FL-35E at 15°. At 46° the light covers a wider field. The spot reading applies to the 2400B at the stated focus and distance.
| Fixture | FL-35E operating condition |
|---|---|
| Evoke 2400B | Documented motorized pairing. The 75,700 lux spot figure is for this head. |
| Evoke 5000B | Listed up to 2,400 W with this lens. Use the 5000B-specific data for exposure planning. |
| Evoke 900C / 1200 / 1200B | FL-35E is excluded in the Nanlux chart. Check the FL-35YK column for the manual lens. |
Practical uses
For a two-position cue, set the barn doors with the beam at its widest working position. Rehearse the zoom on the same control path the board operator will use during the take. Watch the frame edges through the move. A leaf that keeps spill off the ceiling at flood may become visible halfway through the cue.
Rental and used-gear checks
- Read the full suffix on the optic and confirm the fixture model on the order.
- Test the motor from both the lens and the intended remote control. Check the fixture firmware against the control tutorial if the zoom option is missing.
- Pull the rotating doors and matching trolley case. Mark the two working beam positions during prep.