amaran 45° Tube Grids for T2c, PT2c, T4c and PT4c

Last Updated 3 days ago

Two-foot amaran fabric tube grid with its cells open

amaran’s 45° tube grid limits sideways spill along the tube’s emitting face. Two lengths cover four fixtures. The two-foot version fits both the T2c and PT2c, and the four-foot version fits the T4c and PT4c.

Grid angle
45°
2-foot grid
T2c / PT2c
4-foot grid
T4c / PT4c

Compatible fixtures

Use the model suffix and tube length together when booking. The PT2c and PT4c pixel tubes share their respective grid sizes with the T2c and T4c. The shorter PT1c has its own grid.

Key specifications

SpecificationDetails
Two-foot version45° Grid for amaran T2c/PT2c
Four-foot version45° Grid for amaran T4c/PT4c
Light controlFabric grid with repeated cells along the emitting face
QuantityOne length-specific grid per product

What the grid changes

SetupWhat to check
Set wall near the tubeAngle the gridded face towards the subject and check the wall from camera. The cells reduce off-axis light.
Tube visible in shotThe black cell pattern may read in frame. Check the intended lens and focus before committing to the grid.
Pixel effectThe grid shapes the direction of the light. The PT tube still supplies the pixel pattern.

On set

For a coloured edge beside a neutral wall, start with the tube on its mark and compare grid on and off from camera. Rotate the tube until the edge stays on the subject throughout the move. Recheck exposure at both ends of the mark.

Rental and used-gear checks

  • Match the two-foot or four-foot label to the fixture before packing.
  • Open the full length and check for crushed cells, twisted fabric and damaged attachments.
  • Check access to the tube controls, ports and mount with the grid installed.

Back to contents