Aladdin 1×1 Softbox with Diffuser

Last Updated 3 days ago

Aladdin 1×1 softbox with its front diffuser

Aladdin’s 1×1 softbox gives the BI-FLEX M7 and MOSAIC MINI 1×1 a square diffused face. The shallow fabric box is useful when a mat can sit close to the subject but reflections show the individual emitters. The accessory code is 1X1-SBX.

Softbox
1X1-SBX
Replacement diffuser
1X1-SBX-DIF
Softbox grid
1X1-SBX-GRID

Compatible fixtures

Aladdin lists the same softbox, front diffuser and softbox grid for both heads. There is also a separate 1×1 frame system. Its grid and diffuser carry FR part numbers. Specify the part that matches the hardware already in the bag.

Key specifications

Part numberItem
1X1-SBXSoftbox with front diffuser
1X1-SBX-DIFReplacement front diffuser for the softbox
1X1-SBX-GRIDGrid for the softbox
1X1-FR-GRIDGrid for the separate 1×1 frame

Lighting a face in a tight space

Place the softbox just outside frame and watch the reflection in the eyes or glasses. Moving this small source closer makes it appear larger to the subject. It also increases the exposure change when the actor leans in or back. Check both marks before locking the lamp.

Practical uses

For a close-up against a dark wall, start with the front cloth alone. Add the softbox grid if the wall or lens still sees too much of the luminous face, then recheck the key level. On a glossy product, bring the box close enough that its square reflection describes an edge and angle it until the reflection clears the label.

Rental and used-gear checks

  • On a rental order, 1X1-SBX identifies a softbox supplied with diffusion.
  • If the grid is wanted, add 1X1-SBX-GRID to the list.
  • With a used kit, spread the cloth out and check it for discolouration or uneven wear before using two mats as a matched pair.

Back to contents