Last Updated 3 days ago

amaran’s 45° tube grid limits sideways spill along the tube’s emitting face. Two lengths cover four fixtures. The two-foot version fits both the T2c and PT2c, and the four-foot version fits the T4c and PT4c.
- Grid angle
- 45°
- 2-foot grid
- T2c / PT2c
- 4-foot grid
- T4c / PT4c
Compatible fixtures
Use the model suffix and tube length together when booking. The PT2c and PT4c pixel tubes share their respective grid sizes with the T2c and T4c. The shorter PT1c has its own grid.
Key specifications
| Specification | Details |
|---|---|
| Two-foot version | 45° Grid for amaran T2c/PT2c |
| Four-foot version | 45° Grid for amaran T4c/PT4c |
| Light control | Fabric grid with repeated cells along the emitting face |
| Quantity | One length-specific grid per product |
What the grid changes
| Setup | What to check |
|---|---|
| Set wall near the tube | Angle the gridded face towards the subject and check the wall from camera. The cells reduce off-axis light. |
| Tube visible in shot | The black cell pattern may read in frame. Check the intended lens and focus before committing to the grid. |
| Pixel effect | The grid shapes the direction of the light. The PT tube still supplies the pixel pattern. |
On set
For a coloured edge beside a neutral wall, start with the tube on its mark and compare grid on and off from camera. Rotate the tube until the edge stays on the subject throughout the move. Recheck exposure at both ends of the mark.
Rental and used-gear checks
- Match the two-foot or four-foot label to the fixture before packing.
- Open the full length and check for crushed cells, twisted fabric and damaged attachments.
- Check access to the tube controls, ports and mount with the grid installed.