DoPchoice SNAPBAG for ARRI SkyPanel S60

Last Updated 10 hours ago

DoPchoice SNAPBAG on an ARRI SkyPanel S60 with the front diffusion raised

The rectangular S60 SNAPBAG gives the SkyPanel a larger emitting face for an interview key, window source or tabletop reflection. It fits the Classic S60 front directly. The SkyPanel X21 needs ARRI’s S60 Adapter to accept the same bag.

DoPchoice code
SBA60
ARRI code
L2.0008145
Installed size
90 × 60 × 30 cm

Compatible fixtures

DoPchoice lists the S60 as the direct-fit head. ARRI lists L2.0008145 among the front accessories for its optional X21 adapter. On the SkyPanel X fixture page, this fit applies to a single X21 module with the adapter installed.

Key specifications

SpecificationDetails
DoPchoice / ARRI identifiersSBA60 / L2.0008145
Installed weight0.7 kg
Front and depth90 × 60 cm front, 30 cm deep
IncludedHalf Grid front diffusion and carrying bag
Accessory on X21ARRI S60 Adapter L2.0048578

Cloth, bag and grid

SetupWhat to check
Half Grid clothThis is the name of the supplied diffusion fabric. Fit it across the open face to make the full rectangle luminous.
Fabric eggcrateFor directional control, request the SNAPGRID made for the SNAPBAG opening. Its attachment and size differ from the grid for the bare S60.
Bare-panel gridUse the panel’s direct-fit grid when you want to keep the smaller source face and shallow profile.

On set

Check the reflection in glasses or a polished tabletop from the shooting angle. A broad horizontal rectangle can look much larger in the reflection than the bare S60. Angle and distance are worth settling before adding an eggcrate.

Rental and used-gear checks

  • Verify SBA60 or ARRI L2.0008145 and the Half Grid diffusion cloth.
  • Allow for 30 cm of extra depth in front of the head at working height.
  • For an X21, pack the adapter alongside the bag. Confirm any front grid has the SNAPBAG dimensions.

Back to contents