Last Updated 2 weeks ago
Overview
The Godox KNOWLED M600D is a fixed-daylight Bowens-mount COB LED with a separate controller and supported battery-power options.
M600D is the fixed-daylight original M600 option for reflector, Fresnel, bounce and diffusion work. Its 740W maximum input and external wireless-DMX requirement should remain separate from newer R/Pro specifications.
Key specifications
| Specification | Details |
|---|---|
| Engine / CCT | 600W-class daylight COB; fixed 5,600K |
| Maximum electrical input | 740W |
| Manufacturer colour references | CRI ≥96; TLCI ≥97 |
| Reference output | 164,000 lux at 1m/5,600K with standard reflector |
| Optical interface | Bowens; compatible FLS10/soft modifiers |
| Head / controller | Approximately 4.5kg / 3.987kg |
| Head dimensions | 447.3 × 242.8 × 152.9mm |
| Power arrangements | AC and supported V-mount operation with model-specific output limits |
| Controls | DMX512, Godox 2.4GHz and Bluetooth; external CRMX receiver |
| Temperature reference | −10°C to 40°C |
| Exposure guidance | Original manual requires dry use; do not borrow a newer model’s IP rating |
Strengths and limitations
Strengths
- A fixed-daylight head provides a simple source for bounce, diffusion or the listed Fresnel.
- Separate control and supported camera batteries provide alternative deployment options.
Limitations
- Warm matching requires gel or another fixture.
- External CRMX, battery limits and mute output must be included in a complete package decision.
Practical uses
Use it for daylight bounce, diffusion or a controlled beam with the appropriate Fresnel. For a used package, inspect the controller, head cable and battery equipment as carefully as the lamp head.
| Setup | How to use this fixture |
|---|---|
| Daylight bounce | Choose reflector coverage to illuminate the useful bounce surface. The subject’s exposure depends on the full bounce arrangement. |
| Focused accent or window light | Use the compatible FLS10 and set focus for the required area before adjusting level. A Fresnel spot and bare COB are different sources. |
| Warm scene | Allow for colour-correction gel and its transmission loss, or compare a bi-colour option if frequent changes are needed. |
Output and colour
M600D is fixed at 5,600K. Godox lists 164,000 lux at 1m with the standard reflector. The compatible FLS10 provides adjustable focus; bounce, diffusion and correction gel change the resulting exposure. Controls and connections belong to the original M600D generation.
Sources: knowled M600D; Godox KNOWLED lighting catalogue: Chinese; model-specific tables.
The 164,000-lux figure is measured at 1m with the standard reflector. Bare-head, 3m and broad soft-source readings describe different conditions.
Tungsten matching requires correction gel, with a corresponding exposure loss. Compare the complete corrected or diffused source at the working distance.
Tests and reviews
Rob Hall’s 2022 review compares fan noise, size and power use. Art Video Productions demonstrates the FLS10 and discloses a supplied review unit.
Watch Hall’s comparison and the supplied-unit operating workshop.
Power and batteries
Maximum consumption is 740W, separate from the 600W engine class. Supported V-mount operation depends on the original controller’s battery, cooling and discharge conditions. Demonstrate the required output on the actual battery arrangement before leaving prep.
The original manual specifies 14.8V or 26V battery operation, including which side supports unilateral supply. The controller’s marked arrangement identifies the correct connection.
Control, cooling and camera operation
| Control path | Hardware and operating notes |
|---|---|
| Local / app | Onboard/controller operation and supported Bluetooth app. |
| Handheld system | Godox 2.4GHz remote. |
| Console | DMX512; external receiver for CRMX reception. |
| Dimming | Linear, S-curve, Exponential or Logarithmic; retain the curve with the cue. |
Mute mode and maximum-reflector output are not automatically the same configuration. Establish the quiet operating level before setting exposure and testing dialogue sound.
For low-level cues, test the selected dimming curve and production shutter setting through the final modifier.
Modifiers, rigging and the working package
Published weights are approximately 4.5kg for the head and 3.987kg for the controller. The complete kit also includes the compatible FLS10/Bowens modifier, yoke, controller clamp and head cable, with battery and optical support as required. Inspect the accessory interface, cable strain relief and the unit’s marked protection rating.
| Part | Working requirement |
|---|---|
| Head | Approximately 4.5kg before accessories |
| Controller | Approximately 3.987kg before battery load |
| Optics | Correct FLS10 or Bowens modifier and support |
| Wireless | External DMX receiver and its power when needed |
| Cables | Correct head lead, controller clamp and strain relief |
Inspect the optic interface, yoke, controller clamp and cable connectors. The original manual specifies dry-use operation.
Alternatives and related fixtures
| Fixture | When to compare it |
|---|---|
| Godox KNOWLED M600Bi | Choose bi-colour adjustment if changing gels between tungsten and daylight would slow the job. |
| Aputure Light Storm LS 600d Pro | Compare another daylight Bowens package by reflector coverage, full component weight and communications. |
| Nanlite Forza 500 II | Compare the Forza's tint adjustment, cooling and battery arrangements at the same beam coverage. |
What people are saying
Rob Hall
Hall positions the M600D against other high-output daylight COB fixtures and includes fan noise, size and power comparisons. The review dates from 2022, so its pricing and flagship descriptions are historical. Watch video.
Art Video Productions
The extended workshop includes the FLS10 and barn doors as well as operation. The creator says the product was received in exchange for a review, while stating that the content was not paid for or subject to outside approval. Watch video.
Videos
Rob Hall examines the M600D, its cooling, power and accessories.
Rental and used-fixture checks
- Check the exact controller's input and battery settings under the intended load.
- Fit the FLS10 or softbox and check yoke and Bowens retention.
- Listen to fan/mute operation after warm-up and test dimming with the intended shutter.
Documentation and specifications
- Godox KNOWLED lighting catalogue: Chinese; model-specific tables
- knowled M600D
- M600D-Product-KNOWLED
- Godox KNOWLED M600D: www.godox.com reference
- Godox KNOWLED M600D: www.knowled.com reference
Browse Godox lights · COB lights · all equipment.