Last Updated 1 day ago
Celeb 401 Overview




The Celeb 401 is a long rectangular tunable-white panel.
Its 45-inch width separates it from the square 401Q and makes it useful for a two-shot or a long highlight on a reflective surface.
- Bi-Colour LED Soft Panel Legacy rectangular model, not the 401Q.
- 210 W at 120 V AC 198 W under the published DC test conditions.
- Colour Temperature2,700–6,500 K Adjustable white.
- Weight12 kg centre-mount configuration.
- Beam Angle Broad fixed output; use a matching louvre or flags for spill control.
- IP RatingNot specified in the archived documentation. Do not assume water protection. Read the IP Rating guide.
Celeb 401 Specifications
| Specification | Details |
|---|---|
| Manufacturer and model | Kino Flo Celeb 401 |
| AC input | 100–240 V AC, 50/60 Hz; 210 W in the published 120 V specification, 207 W in the 230 V specification |
| DC input | 18–28 V DC, 198 W; 8.25 A at 24 V DC |
| Colour temperature and dimming | 2700–6500 K; 1–100% |
| Centre-mount size and weight | 45 × 14 × 5 in (114.5 × 36 × 13 cm); 12 kg (26 lb) |
| Other mounts | Yoke: 50 × 16.5 × 5 in. Pole-Op: 50.5 × 16.5 × 5 in. Kino Flo lists both at 12 kg (26 lb). |
Output Calculator
Select the published setup and a manufacturer distance, or enter a custom throw where supported. The results describe centre-beam output, not the brightness across the whole beam.
Camera Settings
If the calculator does not load, use the published photometric table or source on this page. JavaScript is required.
F-stop is a planning estimate, not a meter reading. It uses direct, on-axis illuminance and includes only the optics and diffusion named in the selected setup. Meter on set to account for lens transmission, filters, added diffusion, bounce, dimming and ambient light.
How the exposure estimate works
N = √(E × ISO × t / C), where E is illuminance in lux and t = shutter angle ÷ (360 × fps). The default C = 340 is a dome reference; C = 250 is a flat reference. These are calibration constants, not a measured T-stop. A small nonzero digit is tenths of a stop above the displayed full stop.
Distance estimates and comparisons
Published points are used as given. Between published points the calculator fits a curve through the two nearest readings. Outside those points it uses the inverse-square law only when the fixture’s dataset permits it. Distances outside a configuration’s supported range are reported separately. Comparisons use one shared distance and camera setup; equal lux does not imply equal coverage.
View published readings for the selected configuration
The factory chart does not identify the colour temperature or dimmer setting used for these measurements.
Model and Family Fit
The rectangular Celeb 401 is not the square 401Q. Treat the mount and front accessories as part of the exact version when planning width, support and clearance.
Strengths and Limitations
Strengths
- The long face covers a wider subject line and creates a long reflection.
Limitations
- Its length and centre-mount weight can constrain a small studio or vehicle rig.
Practical Uses
Mount the long side parallel to the subject line for more even coverage. Turn the fixture upright to light a standing portrait in a narrow set.
Output and Colour
| Configuration | Distance | Lux | Foot-candles |
|---|---|---|---|
| Kino Flo chart · CCT unspecified | 0.5 m | 11,900 | 1,106 |
| Kino Flo chart · CCT unspecified | 1 m | 4,190 | 389 |
| Kino Flo chart · CCT unspecified | 1.5 m | 2,070 | 192.3 |
| Kino Flo chart · CCT unspecified | 2 m | 1,210 | 112.4 |
| Kino Flo chart · CCT unspecified | 2.5 m | 791 | 73.5 |
| Kino Flo chart · CCT unspecified | 3 m | 560 | 52 |
| Kino Flo chart · CCT unspecified | 3.5 m | 387 | 36 |
| Kino Flo chart · CCT unspecified | 4 m | 331 | 30.8 |
| Kino Flo chart · CCT unspecified | 4.5 m | 269 | 25 |
| Kino Flo chart · CCT unspecified | 5 m | 217 | 20.2 |
The metric readings above reproduce Kino Flo’s chart; the foot-candles beside them are calculated unit conversions. The chart does not identify CCT, dimmer setting or louvre configuration. The calculator retains all ten metric anchors and estimates only within the published 0.5–5 m range.
| Separate Distance (ft) | Published Foot-Candles |
|---|---|
| 2 | 858 |
| 4 | 279 |
| 6 | 134 |
| 8 | 77 |
| 10 | 41 |
| 12 | 36 |
| 14 | 27 |
| 16 | 20 |
| 18 | 17 |
| 20 | 14 |
Photometric source and test conditions.
Independent Measurements
Indie Cinema Academy’s September 2016 studio test of the rectangular Celeb LED 401 DMX reported TLCI 98.1 at a measured 3,073 K and 98.2 at 5,489 K. Its separate 401Q entry is for the square fixture. Indie Cinema Academy test results.
Power and Controls
Kino Flo lists 210 W / 1.8 A at 120 V AC and 207 W / 1.0 A at 230 V AC, with a universal 100–240 V, 50/60 Hz input. DC input is 18–28 V, rated 198 W and 8.25 A at 24 V. The documented dimming range is 100–1%. Local CCT presets and DMX provide repeatable settings. See the manufacturer’s specification table.
Control, Cooling and Camera Operation
Use a local CCT preset as a starting point, then compare the same setting under desk control and at a low dimmer level with the production camera.
Modifiers, Rigging and the Working Package
| Mount Variant | Dimensions | Weight |
|---|---|---|
| Centre Mount | 45 × 14 × 5 in | 12 kg |
| Yoke Mount | 50 × 16.5 × 5 in | 12 kg |
| Pole-Op | 50.5 × 16.5 × 5 in | 12 kg |
The long rectangular head and square 401Q take different front accessories. Confirm the louvre is the right shape.
Choosing the Optic or Modifier
The wide rectangular face can serve as shared fill. If that width starts spilling onto the background, confirm that the louvre belongs to the rectangular 401 and check the falloff at both marks.
Alternatives and Related Fixtures
For a shorter panel from the same generation, see the Kino Flo Celeb 201.
For the later long-format Celeb, see Kino Flo Celeb 450 LED DMX.
What People Are Saying
Field Feedback at a Glance
What worked
- McComb could use one rectangular 401 as an even key across both interview subjects. Dan McComb, interview setup.
- The 401 also worked as shared fill, including when bounced into the ceiling. Dan McComb, interview setup.
- The shootout reviewer liked the skin tones on three subjects despite seeing a slight magenta bias. No Film School, LED shootout.
Drawbacks to plan for
- The roughly 26 lb yoke package needed a junior stand and was awkward to put on a boom. Dan McComb, interview setup.
- His combined 201/401 setup couldn’t balance the uncovered bright windows. That result applies to the full interview rig. Dan McComb, interview setup.
- The approximately 8 ft locking cords in the rented Celeb kit meant adding extensions. Dan McComb, interview setup.
Dan McComb, two-person interview setup
McComb used the Celeb 401 for shared fill while two Celeb 201s keyed the sitters independently. In the reverse arrangement the 401 could key both sitters with a window providing fill.
Videos
- 4Wall’s demonstration compares the rectangular 401 with the 201 and square 401Q.
- Filmmakers Academy shows how the 201 and 401 work as soft sources.
4Wall’s rental demo shows the rectangular Celeb 401 alongside the smaller 201 and square 401Q. It covers the original controls rather than the ones on later Celeb generations.
Rental and Used-Fixture Checks
Check the exact suffix, mount and louvre. The centre-mount specification lists 18 to 28 V DC as a separate power option.
Before You Book
Read the full model and mount on the case, verify the matching louvre and AC or DC package, and test controls before the light is positioned.
Documentation and Specifications
- Kino Flo Celeb 401 electrical and physical specifications
- Kino Flo Celeb 401 service archive
- Photometric reference for the configurations above
Back to contents · Browse Kino Flo lights · Browse all lighting equipment