Nanlite FL-11 Fresnel Lens and Barn Doors

Last Updated 10 hours ago

Nanlite FL-11 Fresnel Lens and Barn Doors

The FL-11 puts a focusable glass Fresnel in front of a compact Nanlite FM-mount head. A quarter-turn seats the optic, then twisting the barrel takes the beam from a tight 10° spot to a 45° flood. The removable metal doors come with the lens.

Mount
Nanlite FM
Beam range
10° to 45°
Weight with doors
1.2 kg

Compatible fixtures

This is a direct FM-mount accessory. The Forza 60 II and 60B II take it on the head itself. Remove the Bowens adapter if it is fitted. Nanlite also lists the Forza 60C, Forza 150B and FS-60B. The head and the colour setting matter when estimating output.

Key specifications

SpecificationDetails
Front opticGlass Fresnel in a manually adjustable barrel
Beam range10° to 45°
Accessory weight0.8 kg without doors, 1.2 kg with doors
SuppliedFL-11, removable metal barn doors, drawstring pouch and manual

Throw and beam quality

Nanlite rates the Forza 60B II with the FL-11 at 34,700 lux at 1 m, 5,600 K and 10° spot. That reading is for the patch at the centre of a narrow beam. To light a face that moves across the frame, check the actor’s marks and open the beam until both marks hold exposure.

Independent testing

In Newsshooter’s Forza 60C test, Matthew Allard found visibly darker edges at full spot. Closing the doors into that 10° beam also introduced patterns. For a smooth slash on a wall, try a wider focus and check the cut on camera before committing to that head position. Read the full test at Newsshooter.

Practical uses

For a tabletop highlight, set the lamp far enough back to work around the camera. Adjust the barrel for the size of the pool, then trim the background side with a leaf. For a small bounce, flood out until the corners are doing work. If the shot needs a projected window pattern or lettering, Nanlite’s FM-mount projection attachment accepts the appropriate pattern hardware.

Rental and used-gear checks

  • Ask whether the rental includes the FL-11 or only the small reflector supplied with the light.
  • Check that the barrel travels smoothly and that the doors hold their position after the head tilts.
  • Pull focus through its range with the actual fixture, especially if a clean wall cut is part of the shot.

Back to contents