Last Updated 7 hours ago
Forza 150 Overview



The original Forza 150 is a daylight spotlight with an FM mount. It uses a separate power supply and offers a small-head option for a controlled key, ceiling bounce or daylight accent.
The original 150 is fixed at 5,600 K. Use CTO gel when you need a warmer source, or choose the bi-colour 150B if colour temperature needs to change between setups.
- Type
Fixed-daylight COB LED spotlight, not the bi-colour Forza 150B. - Power
170 W rated input; 24 V DC from the supplied AC adapter. - Colour Temperature5600 KFixed daylight.
- Weight / Mount
1.36 kg head; FM accessory mount. - Beam Control
Supplied reflector, optional FM Fresnel or projection optics; Bowens accessories require the adapter. - IP Rating
No numeric IP rating stated in the manufacturer specifications; do not assume weather protection.
Forza 150 Specifications
| Specification | Details |
|---|---|
| Manufacturer and model | Nanlite Forza 150 |
| Source or rated power | 170 W rated input |
| Optics, colour or format | Daylight COB, FM accessory mount |
| Head or system detail | 1.36 kg head |
| Fixture Dimensions | 227 × 133 × 115 mm |
| Input | DC 24 V / 7.5 A maximum; AC adapter 100–240 V, 50/60 Hz |
| Dimming | 0–100% |
| Colour Rendering | CRI 96; TLCI 98 (manufacturer ratings) |
Output Calculator
Select the published setup and a manufacturer distance, or enter a custom throw where supported. The results describe centre-beam output, not the brightness across the whole beam.
Camera Settings
If the calculator does not load, use the published photometric table or source on this page. JavaScript is required.
F-stop is a planning estimate, not a meter reading. It uses direct, on-axis illuminance and includes only the optics and diffusion named in the selected setup. Meter on set to account for lens transmission, filters, added diffusion, bounce, dimming and ambient light.
How the exposure estimate works
N = √(E × ISO × t / C), where E is illuminance in lux and t = shutter angle ÷ (360 × fps). The default C = 340 is a dome reference; C = 250 is a flat reference. These are calibration constants, not a measured T-stop. A small nonzero digit is tenths of a stop above the displayed full stop.
Distance estimates and comparisons
Published points are used as given. Between published points the calculator fits a curve through the two nearest readings. Outside those points it uses the inverse-square law only when the fixture’s dataset permits it. Distances outside a configuration’s supported range are reported separately. Comparisons use one shared distance and camera setup; equal lux does not imply equal coverage.
View published readings for the selected configuration
Model and Family Fit
The original Forza 150 is a daylight head. If the job needs to move between tungsten and daylight without gels, compare the 150B as a different fixture rather than borrowing its output figures.
Strengths and Limitations
- A light daylight head with a removable reflector is quick to move between setups.
- The Forza 150 is fixed at 5,600 K. To match a warmer room, add CTO gel. Use CTB gel if you need a cooler color temperature.
Practical Uses
The supplied reflector increases centre output substantially. Choose the bare head or reflector according to how much of the bounce or diffusion surface needs to be lit.
Output and Colour
| Configuration | Distance | Lux | Foot-Candles (Converted) |
|---|---|---|---|
| 5,600 K · bare | 1 m | 6,870 | 638.2 |
| 5,600 K · bare | 2 m | 1,760 | 163.5 |
| 5,600 K · bare | 3 m | 858 | 79.7 |
| 5,600 K · reflector | 1 m | 27,960 | 2597.6 |
| 5,600 K · reflector | 2 m | 6,655 | 618.3 |
| 5,600 K · reflector | 3 m | 2,824 | 262.4 |
| 5,600 K · PJ-FMM-19 | 1 m | 95,750 | 8895.5 |
| 5,600 K · PJ-FMM-19 | 2 m | 18,870 | 1753.1 |
| 5,600 K · PJ-FMM-19 | 3 m | 7,465 | 693.5 |
| 5,600 K · PJ-FMM-36 | 1 m | 33,060 | 3071.4 |
| 5,600 K · PJ-FMM-36 | 2 m | 6,713 | 623.7 |
| 5,600 K · PJ-FMM-36 | 3 m | 2,816 | 261.6 |
Nanlite’s Forza Series brochure NL202302-1, Forza 150 chart gives these 5,600 K readings for the original Forza 150, not the 150B. Foot-candles above are conversions from lux; estimates are limited to 1–3 m. The brochure and manufacturer’s launch figures reproduced by Newsshooter reverse the FL-11 spot/flood labels: at 1 m the brochure labels 17,050 lux spot and 69,200 lux flood, while the launch chart labels them 45° flood and 10° spot. Those disputed Fresnel configurations are not included in the calculator.
Power and Batteries
The original daylight head has local, wireless and wired control options. Its 170 W rated input differs from the 150 in the model name.
Control, Cooling and Camera Operation
Test the actual control path before rigging. If the desk is driving the lamp, check the optional DMX/RDM adapter is in the case and run a fade on camera at the intended frame rate.
Modifiers, Rigging and the Working Package
The FM mount accepts the FL-11 Fresnel and PJ-FMM-19/36 projection attachments. The AS-BA-FMM Bowens adapter is included in the manufacturer’s listed kit; it allows Bowens modifiers to be fitted. DMX/RDM connection uses the optional CB-DMX-3.5C-1/2 adapter cable.
Choosing the Optic or Modifier
Set the modifier before comparing the light: the compact FM Fresnel and a Bowens softbox via the adapter solve different jobs and need different stand clearance.
Alternatives and Related Fixtures
For the bi-colour Forza of this size, see Nanlite Forza 150B.
What People Are Saying
Field Feedback at a Glance
These reviews cover the original fixed 5600 K Forza 150, not the bi-colour 150B. The notes below distinguish hands-on observations from limits in Nanlite’s manual.
What worked
- Florasway’s hands-on review highlights the compact head, about 1.36 kg and 23 cm long. That is the head alone, not the assembled weight with power supply or modifier.
- Andrew Lock, Gaffer & Gear demonstrates the FL-11 Fresnel as a way to focus the beam with a compact FM accessory rather than using the supplied dish.
- Lock also demonstrates the 19° FM projector, a separate attachment for a tight projected pool or controlled pattern. The output calculator’s projector figures come from Nanlite, not Lock’s test.
Drawbacks to plan for
- Lock flags battery issues in his power-inlet chapter. The manual calls for a V-mount battery rated 14.4–26 V and 10 A when using the battery grip; bench-test the actual battery and grip before relying on the rig away from mains.
- Lock flags DMX issues and shows his own DMX test. The manual specifies a separate DMX adapter cable. Test the actual cable, address and console mode together before a cue-dependent shoot; one review does not establish that every unit has the same fault.
- Turning the fan off reduces maximum output to 25% on the original Forza 150, according to Nanlite’s original Forza 150 manual. Set the fan mode before metering a sound-sensitive setup. This is a documented limit, not an owner complaint.
Videos
Gaffer & Gear 180 – Nanlite Forza 150
Rental and Used-Fixture Checks
Check the FM accessories or Bowens adapter in the case. The bi-colour Forza 150B has separate performance figures.
Nanlite Forza 150 photometric chart (family brochure).
Before You Book
Check the exact daylight model, mount adapter and DMX lead with the head on the bench before the case goes on the truck.
Documentation and Specifications
Back to contents · Browse Nanlite lights · Browse all lighting equipment