Last Updated 1 day ago
Overview
The Godox KNOWLED MG2400Bi is a high-output bi-colour G-mount LED with a separate power and control system. Its head, supply and large optics form a substantial package, distinct from both the MG1200 series and the full-colour MG2400R.
MG2400Bi is a large bi-colour G-mount source, distinct from MG2400R. The specific GF14 revision and the head/controller’s applicable IP documentation are important parts of a rental or used-package assessment.
Key specifications
| Specification | Details |
|---|---|
| Capability / white range | Bi-colour, 2,800–6,500K |
| Maximum input | Approximately 2,900W |
| Supply reference | 100–240V, 50/60Hz; 30A maximum listed |
| Manufacturer colour references | Average CRI ≥96; TLCI ≥96 |
| Reference output | At 5m/5,600K: 4,890 lux bare; 16,200 lux with standard 45° reflector |
| Head / controller | Approximately 22kg before stated head exclusions / 13kg |
| Control | DMX/RDM, internal CRMX, Art-Net/sACN, Bluetooth and optional RC11 |
| Dimming | 0–100%, four curves; 0.1% reference increments |
| Ingress-reference conflict | Current product page IP65; earlier linked manual IP54 |
| Mount | G-mount; physically establish GF14 revision fit |
Strengths and limitations
Strengths
- High-output bi-colour operation and G-mount optics suit substantial window, bounce and diffusion work.
- Internal CRMX/network control allows repeatable remote cues.
Limitations
- No full-colour RGB operation, and input is higher than the model-class number.
- Accessory revision and conflicting published protection ratings need confirmation on the supplied package.
Practical uses
Use it for window light, large bounce or diffusion setups where reach is required. Confirm the particular Fresnel or projection accessory revision as well as the electrical distribution before the equipment leaves the rental house.
| Setup | How to use this fixture |
|---|---|
| Large daylight or warm bounce | Set CCT and reflector coverage before metering the final bounce. The 45° reference describes a different source from a Fresnel spot. |
| Focused GF14 setup | Fit the actual Fresnel during prep. The owner thread describes a revision-related fit issue, so mount family alone is insufficient. |
| Heavy diffusion | Allocate power and support for the complete setup, then establish exposure through the material rather than from a bare-head figure. |
Output and colour
MG2400Bi is a 2,800–6,500K bi-colour source, distinct from the full-colour MG2400R. At 5,600K/5m the manufacturer table gives 4,890 lux bare and 16,200 with the standard 45° reflector. A GF14 spot/flood setting or large diffusion frame is another configuration. Keep CCT and the physical accessory revision visible when judging an upgrade from a smaller G-mount lamp.
G-Mount, Output and Power Planning
| 5,600K, 100% brightness | 3m | 5m | 10m |
|---|---|---|---|
| Bare light | 12,000 lux | 4,890 lux | 1,700 lux |
| Standard 45° reflector | 44,600 lux | 16,200 lux | 4,650 lux |
Sources: Godox KNOWLED MG2400Bi documentation (PDF); Godox KNOWLED MG2400Bi documentation (PDF).
The 5m bare-head and 45° reflector figures describe different beam coverage from GF14 spot/flood settings. Comparable MG2400R or smaller-head measurements need matching optics and coverage.
The current product page advertises IP65 while an earlier manual gives IP54. Establish the marked unit/revision and applicable instructions before exterior exposure; a newer marketing page does not retrospectively identify every older rental head.
Tests and reviews
Dapper Gaffer’s review includes powering the lamp, balancing the GF14 and support/handling choices. The separate r/setlighting discussion reports a GF14 fit problem and a reply about a revised accessory. The thread is a practical revision warning, not a model-wide failure-rate study.
Watch the working-package review and read the GF14 revision discussion.
Power and batteries
Maximum consumption is approximately 2,900W. The specification lists 100–240V supply conditions and up to 30A; use the actual controller marking and the required distribution for the operating setup.
The controller weighs approximately 13kg. Godox describes an 8m connection between head and controller, whose cable and separate support add to the kit beyond the 22kg head.
Control, cooling and camera operation
| Control path | Hardware and operating notes |
|---|---|
| Direct | Light-body and controller operation. |
| Console | DMX512/RDM and internal LumenRadio CRMX. |
| Network | Ethernet Art-Net/sACN, with universe/protocol recorded. |
| App / removable interface | Supported Bluetooth/KNOWLED app and optional RC11, sold separately. |
| White capability | Bi-colour source; a full-colour MG2400R personality does not add an RGB engine. |
Set fan and output conditions before comparing exposure or checking sound. A heavy diffused setup can need more reserve than a reflector-led demonstration suggests.
Record CCT, curve, cooling and console personality with a repeat cue. When replacing a head or accessory, recheck both the colour/exposure result and the mechanical fit.
Modifiers, rigging and the working package
Compatible accessory profiles · Godox KNOWLED GF14 Fresnel Lens
The head is approximately 22kg before the stated excluded accessories, with a separate 13kg controller. The Reddit report below identifies a GF14 fit/revision issue, so physically test the actual Fresnel and head before the rental leaves. G-mount alone is not enough to establish every accessory revision's fit. Include yoke, optic, cable and all support hardware in the working load.
| Component | Working requirement |
|---|---|
| Head | Approximately 22kg before excluded yoke and reflector |
| Controller | Approximately 13kg separately |
| GF14 | Actual compatible revision and required support fitted at prep |
| Other optics | Exact G-mount reflector or projector for the job |
| Weather use | Unit/revision and applicable IP instructions established first |
A GF14 changes front balance and occupied space. Exercise the tilt lock and full required movement with the actual Fresnel attached, and include the head cable and optic support in the load plan.
Alternatives and related fixtures
| Fixture | When to compare it |
|---|---|
| Godox KNOWLED MG2400R | Choose the R model for full colour, comparing a different engine and electrical specification. |
| Godox KNOWLED MG4K | Compare the newer compact bi-colour head by exact optic, input and complete support load. |
| Aputure STORM 1200x | Compare a lower-input white/tint STORM package with different optics when its exposure is sufficient. |
What people are saying
Reddit, r/setlighting
A user reports difficulty fitting a GF14 Fresnel to an MG2400Bi. A reply says the GF14 was revised for compatibility, making the accessory version important when assembling that combination. View discussion.
Dapper Gaffer
The review includes powering the fixture, balancing the GF14, strengths and limitations, and the need to consider a crank stand. It places setup and handling alongside output in the purchase decision. Watch video.
Videos
Dapper Gaffer tests the MG2400Bi, including Fresnel balance, power and handling.
Rental and used-fixture checks
- Fit the actual GF14 and check the revision and balance before collection.
- Verify head/controller protection labels, input and all cable connections.
- Test fan mode and output with the intended reflector/Fresnel and desk personality.
Documentation and specifications
- Godox KNOWLED MG2400Bi documentation (PDF)
- Godox KNOWLED MG2400Bi documentation (PDF)
- MG2400Bi-Product-KNOWLED
- Godox KNOWLED MG6K
MG2400Bi current linked Chinese/English manual
Browse Godox lights · COB lights · all equipment.