Aladdin FABRIC-LITE 350

Last Updated 8 hours ago

Overview

Select a photo to enlarge.

It is also identified as FABRIC-LITE 35 in Aladdin kit and accessory codes. That shorter number is a model name, not a 35 W power rating. The 200 W and 350 W versions use different power arrangements.

Key specifications

Specification	Details
LED system	350 W bi-colour
Panel size	900 × 900 mm
Panel mass	1.2 kg in the 2022 manual
CCT range	3000–6000 K
Manufacturer colour ratings	Product page: CRI 97 / TLCI 97
Published beam angle	140°
Dimming	0.5–100% in 2022 panel manual
Control	DMX512 / LumenRadio through matching dimmer
Power system	48 V system; dual-battery converter / matching AC supply
Protection	Panel IP32 / dimmer IP21 on product page

Strengths and limitations

Strengths

• Large emitting face folds for transport
• Soft variable-white lighting
• Frame, diffusion and grid system

Limitations

• The complete frame and power package is larger than the fabric alone.
• No independent RGB or pixel control.
• The two wattage versions have different electrical requirements.

Practical uses

Table overhead. Tension the mat on its proper frame and add diffusion and a grid for the working setup. Assess the entire rigging load and retain power equipment independently.

Soft interview key. Bring the broad source close enough to create the intended wrap, then use negative fill to keep contrast. Use the grid or flags to keep light off the background.

Studio ambience. Use it as a broad top or side source where a small hard spotlight would need a separate bounce. Check the illuminated area rather than only a centre meter reading.

Back to contents

Output and colour

The linked Aladdin photometric graphic is specific to this wattage. Compare at the published distance and CCT, with the same modifier configuration. Do not transfer output figures between the 200 W and 350 W fabric heads.

Diffusion, a grid and the distance from the subject determine the working softness and level. A larger emitting face is not a narrow-beam daylight punch light, even when its electrical rating is substantial.

Setting	0.6 m	1 m	2 m	3 m
3200 K	15,400	7,910	2,340	1,150
5600 K	17,800	8,940	2,670	1,300

View Aladdin’s model-specific photometric chart.

Back to contents

Power and batteries

The current product page identifies a 48 V system and a dual-battery converter using two 26 V batteries. Full Kit lists include two AC adapters. Use the matching complete supply arrangement; an ordinary single V-mount battery is not a direct 48 V feed.

The 2022 panel manual also lists 12–30 V at the dimmer, while the current product page identifies the complete 48 V package. The 350 W dimmer guide shows a separate dual-input power adapter. Identify the complete controller and converter arrangement from its labels before choosing supplies; do not assume a single lower-power adapter can run the 350 W system.

Control, cooling and camera operation

The matching dimmer provides two-channel bi-colour control, wired DMX and LumenRadio in the listed kit arrangement. Keep the antenna unobstructed and the controller reachable for addressing, pairing and local operation.

The mat is passively cooled. Leave airflow around the fabric and avoid taping across emitters or folding it sharply while operating. Panel IP32 and dimmer IP21 are limited, different ratings; keep the electrical package protected from wet conditions.

350 W controller and two-source adapter

The FBS350BIMADIM manual specifies a 48 V input through a three-pin power-adapter socket, 5-pin DMX input/output and a two-channel white/bi-colour personality. Choose cable or LumenRadio control in the menu; the unit restarts to save that selection.

The separate power adapter provides A and B inputs, battery mounting and an AC/battery selector. Use the approved complete adapter arrangement and its two supplies or batteries. The 200 W family’s battery-plate connection is a different power path; equal-looking panel accessories do not justify substituting a lower-rated supply.

Setup check	Why it matters
Sheet / panel selection	The manual says to set sheet type before connection. Its menu examples include other panels; its technical compatibility line identifies FABRIC-LITE 35. Follow the actual 350 W unit and head labels.
RF Link Reset	Clear the previous LumenRadio transmitter pairing before linking a replacement.
DMX personality	Match two-channel white control and verify low-end fades, CCT and blackout.
Environment	The controller lists IP21 and −10 to 40°C operation; the fabric panel’s separate rating does not protect the entire package.

Back to contents

Modifiers, rigging and the working package

The full frame package includes the dedicated fabric support, diffuser and grid, with bungees and a transport bag. Confirm whether a listing is a bare panel, a system or the complete framed kit.

When joining several fabric panels, calculate the source size from the actual arrangement. Four three-foot-square panels in a two-by-two array cover roughly six by six feet; they do not make a twelve-foot-square emitting surface. The complete frame and modifiers determine the rigging load and wind exposure.

Back to contents

Alternatives and related fixtures

Fixture	Choose it for
amaran F22x	A smaller square variable-white mat.
LiteMat 4 Plus	A broad rectangular variable-white source.
FABRIC-LITE 200	900 × 900 mm, 200 W bi-colour fabric panel using the matching 200 W controller family. Lower rated head power than FABRIC-LITE 350; it is an earlier range entry.
MOSAIC 4×4	1100 × 1100 mm, 600 W white / 420 W RGB single-zone mat. Choose the square reflected shape when spatial pixel effects are unnecessary.
MOSAIC 4×4 PIXEL	The 1100 × 1100 mm format with 196 controllable pixels and M-PIXEL-DIM. Choose it for moving colour regions and interactive effects; include the extra network and mapping work.

Back to contents

What people are saying

Burguete Design: Aladdin-published production account.

In Aladdin’s published production account, Burguete Design describes using FABRIC-LITE with BI-FLEX fixtures in a dark bar with mirrors. The crew emphasised the lightweight head and mounting flexibility. Read the source.

Back to contents

Videos

FABRIC-LITE technical series: the system

Manufacturer overview of the FABRIC-LITE family.

FABRIC-LITE technical series: the frame

Frame assembly guide for the family.

Back to contents

Rental and used-fixture checks

Inspect the fabric, grommets, hook-and-loop attachments and LED regions. Test the entire warm and cool white field before folding and packing.

Count the frame pieces, bungees, diffusion, grid, supply equipment, extensions and bags. Check the exact wattage of the head and its dimmer, and test DMX and LumenRadio with the intended console.

Documentation and specifications

• Official model specifications
• Panel operating manual
• Matching dimmer manual

Browse Aladdin lights, LED mats or the equipment directory.

Back to contents