Last Updated 1 day ago
Celeb 201 Overview




The Celeb 201 is the short, rectangular, tunable-white member of this generation of Celeb fixtures.
Its broad face suits an interview key where a hard lamp and separate diffusion frame would take too much depth.
- Bi-Colour LED Soft Panel Legacy model, distinct from the Celeb 250.
- 100 W Rated 100–240 V AC or 18–28 V DC.
- Colour Temperature2,700–6,500 K Adjustable white.
- Weight6.8 kg centre-mount configuration.
- Beam Angle Fixed soft panel output; optional louvre limits spill.
- IP RatingNot specified in the archived documentation. Do not assume water protection. Read the IP Rating guide.
Celeb 201 Specifications
| Specification | Details |
|---|---|
| Manufacturer and model | Kino Flo Celeb 201 |
| AC input | 100–240 V AC, 50/60 Hz, 100 W |
| DC input | 18–28 V DC, 100 W; 4.0 A at 24 V DC |
| Colour temperature and dimming | 2700–6500 K; 1–100% |
| DMX | Two-channel intensity and colour temperature profile |
| Centre-mount size and weight | 24 × 14 × 5 in (61 × 35.5 × 12.7 cm); 6.8 kg (15 lb) |
| Other mounts | Yoke: 7.3 kg (16 lb). Pole-Op: 7.7 kg (17 lb). |
Output Calculator
Select the published setup and a manufacturer distance, or enter a custom throw where supported. The results describe centre-beam output, not the brightness across the whole beam.
Camera Settings
If the calculator does not load, use the published photometric table or source on this page. JavaScript is required.
F-stop is a planning estimate, not a meter reading. It uses direct, on-axis illuminance and includes only the optics and diffusion named in the selected setup. Meter on set to account for lens transmission, filters, added diffusion, bounce, dimming and ambient light.
How the exposure estimate works
N = √(E × ISO × t / C), where E is illuminance in lux and t = shutter angle ÷ (360 × fps). The default C = 340 is a dome reference; C = 250 is a flat reference. These are calibration constants, not a measured T-stop. A small nonzero digit is tenths of a stop above the displayed full stop.
Distance estimates and comparisons
Published points are used as given. Between published points the calculator fits a curve through the two nearest readings. Outside those points it uses the inverse-square law only when the fixture’s dataset permits it. Distances outside a configuration’s supported range are reported separately. Comparisons use one shared distance and camera setup; equal lux does not imply equal coverage.
View published readings for the selected configuration
The factory chart does not identify the colour temperature or dimmer setting used for these measurements.
Model and Family Fit
The Celeb 201 is the compact original white-light panel. Choose the centre mount, yoke, or Pole-Op by the planned support; do not use later Celeb 250 specifications for this model.
Strengths and Limitations
Strengths
- The broad face and simple white-light control make interview setups repeatable.
Limitations
- It offers no direct saturated-colour mixing.
Practical Uses
Bring the face near the subject for a broad reflection. A louvre can keep fill off the backing when the lamp must sit close to a wall.
Output and Colour
| Configuration | Distance | Lux | Foot-candles |
|---|---|---|---|
| Kino Flo chart · CCT unspecified | 0.5 m | 9,340 | 868 |
| Kino Flo chart · CCT unspecified | 1 m | 2,740 | 255 |
| Kino Flo chart · CCT unspecified | 1.5 m | 1,240 | 115.2 |
| Kino Flo chart · CCT unspecified | 2 m | 709 | 65.9 |
| Kino Flo chart · CCT unspecified | 2.5 m | 453 | 42.1 |
| Kino Flo chart · CCT unspecified | 3 m | 316 | 29.4 |
| Kino Flo chart · CCT unspecified | 3.5 m | 233 | 21.6 |
| Kino Flo chart · CCT unspecified | 4 m | 180 | 16.7 |
| Kino Flo chart · CCT unspecified | 4.5 m | 143 | 13.3 |
| Kino Flo chart · CCT unspecified | 5 m | 116 | 10.8 |
The metric readings above reproduce Kino Flo’s chart; the foot-candles beside them are calculated unit conversions. The chart does not identify CCT, dimmer setting or louvre configuration. The calculator retains all ten metric anchors and estimates only within the published 0.5–5 m range.
| Separate Distance (ft) | Published Foot-Candles |
|---|---|
| 2 | 623 |
| 4 | 175 |
| 6 | 79 |
| 8 | 45 |
| 10 | 29 |
| 12 | 20 |
| 14 | 15 |
| 16 | 11 |
| 18 | 9 |
| 20 | 7 |
Photometric source and test conditions.
Independent Measurements
Indie Cinema Academy measured the Celeb LED 201 DMX in its studio in September 2016. It reported TLCI 98.1 at a measured 3,088 K and 98.4 at 5,467 K. These two readings describe colour rendering, not the output at a given distance. Indie Cinema Academy test results.
Power and Controls
The original 201 provides 2,700–6,500 K white-light control and 100–1% dimming. Manufacturer ratings are 100 W, 100–240 V AC at 50/60 Hz, or 18–28 V DC; the published DC current is 4.0 A at 24 V. Its onboard presets and DMX control recall intensity and color temperature. See the original Kino Flo operating manual, revision A, pages 19–20.
Control, Cooling and Camera Operation
Check local presets and then run a low-level fade using the intended five-pin DMX path. Test the recorded result with the actual camera rather than inferring flicker performance from dimming range.
Modifiers, Rigging and the Working Package
| Mount Variant | Dimensions | Weight |
|---|---|---|
| Centre Mount | 24 × 14 × 5 in | 6.8 kg |
| Yoke Mount | 28.5 × 16.5 × 5 in | 7.3 kg |
| Pole-Op | 29 × 16.5 × 6 in | 7.7 kg |
The louvre and frame slide into the front of the head. Check which mount is fitted before ordering rigging hardware.
Choosing the Optic or Modifier
The louvre controls spill without adding a second large front surface. If using the frame, verify clearance past the selected mount at the angle you need.
Alternatives and Related Fixtures
For the longer panel from the same generation, see the Kino Flo Celeb 401.
For the later short-format Celeb, see Kino Flo Celeb 250.
What People Are Saying
Field Feedback at a Glance
What worked
- One Celeb 201 per person gave McComb separate keys in a two-person interview. Dan McComb, interview setup.
- The face was soft enough in his interview setup without extra diffusion. Dan McComb, interview setup.
- The 60° louver let Hurlbut keep the 201’s spill off areas he didn’t want lit. Shane Hurlbut ASC, Filmmakers Academy.
Drawbacks to plan for
- McComb found the yoke less precise to position than the baby-pin mount. Dan McComb, interview setup.
- The locking power cords in his rented Celeb kit were about 8 ft long, so the crew needed more extensions. Dan McComb, interview setup.
- The combined 201/401 kit couldn’t balance the bright uncovered windows at his location. That’s a result for his whole setup, not a measurement of a single 201. Dan McComb, interview setup.
Dan McComb, two-person interview setup
McComb used one Celeb 201 per sitter as a key and a Celeb 401 as shared fill. Grids helped keep the key light off the backgrounds.
Videos
4Wall’s rental demo shows the original Celeb 201 alongside the rectangular 401 and square 401Q. Use it to see the older fixtures and their controls, not as a performance test.
Rental and Used-Fixture Checks
Identify centre-mount or yoke hardware and check the local controls and five-pin DMX input. The later Celeb 250 has a different feature set.
Before You Book
Pick the exact mount and verify the louvre and frame are present. Before elevating the fixture, try the planned DC or AC feed and recall the required CCT preset.
Documentation and Specifications
- Kino Flo Celeb 201 series, mounts and replacement parts
- Kino Flo Celeb 201 operating manual, revision A (July 2015)
- Photometric reference for the configurations above
Back to contents · Browse Kino Flo lights · Browse all lighting equipment