Last Updated 5 hours ago
Overview
The Orion 300 FS uses six emitter colours to create tunable white and saturated light through a shared optic. It has a separate control box and works with Bowens-mount modifiers.
The 55° reflector, optional Fresnel, 23° projection lens and dome softbox have separate output readings. Start with the Output Calculator to compare published readings and plan exposure.
- RGBACL LED Point Source Six-emitter full-colour engine with a Bowens accessory mount. Learn about RGBACL.
- 320 W Maximum Input Separate controller with 100–240 V AC input. Battery operation calls for the matching two-battery configuration.
- Colour Temperature 2,000–20,000 K Tunable white with green–magenta adjustment.
- Weight 3.7 kg head; 3.2 kg separate control box. Prolycht lists a 28/16 mm spigot.
- Beam Angle 55° standard reflector; optional Fresnel charts cover 15° spot and 30° flood. Bowens-mount optics change both coverage and output.
- IP Rating IP20 No rated water protection. Keep the head and control box dry. IP rating guide.
Key specifications
| Specification | Details |
|---|---|
| Manufacturer and model | Prolycht Orion 300 FS |
| Source or rated power | 320 W maximum input |
| Optics, colour or format | RGBACL, 2,000 to 20,000 K |
| Head or system detail | 3.7 kg head plus 3.2 kg controller |
Photometric Output Calculator
Estimate centre-beam illumination and the corresponding camera aperture from this fixture’s published measurements.
Estimated output
Select a configuration to calculate.
Manufacturer readings are for the stated optic, colour setting and full output, measured at the beam centre. Values between measured distances are interpolated. Point-source values outside those distances are approximate inverse-square estimates; large sources cannot be reliably extrapolated and are limited to their measured range. Exposure uses frame rate, shutter angle, ISO and the selected incident-meter calibration. Only the optics and diffusion explicitly listed in the measurement are included; additional modifiers, bounce, beam edges, ambient light, ND filters and camera exposure-index differences are not accounted for. Confirm critical exposures on set with a meter. Photometric source
Strengths and limitations
- Six-colour mixing and interchangeable optics combine colour control with a directional field.
- The controller and head cable need space even in a small rig.
Working with the Orion 300 FS
Use the 55° reflector for a broad directional key, or fit the Fresnel for a more concentrated coloured shaft. Compare like optics when judging it against another RGB head.
Output and photometrics
| Configuration | Distance (m) | Factory Lux | Calculated Foot-Candles |
|---|---|---|---|
| 5,600 K · 55° reflector | 1 | 31,090 | 2,888.4 |
| 5,600 K · 55° reflector | 3 | 3,276 | 304.4 |
| 5,600 K · 55° reflector | 5 | 1,200 | 111.5 |
| 5,600 K · 55° reflector | 7 | 680 | 63.2 |
| 3,200 K · 55° reflector | 1 | 27,510 | 2,555.8 |
| 3,200 K · 55° reflector | 3 | 2,930 | 272.2 |
| 3,200 K · 55° reflector | 5 | 1,060 | 98.5 |
| 3,200 K · 55° reflector | 7 | 610 | 56.7 |
| 5,600 K · 23° Projection Lens | 1 | 4,385 | 407.4 |
| 5,600 K · 23° Projection Lens | 3 | 620 | 57.6 |
| 5,600 K · 23° Projection Lens | 5 | 244 | 22.7 |
| 5,600 K · 23° Projection Lens | 7 | 126 | 11.7 |
| 3,200 K · 23° Projection Lens | 1 | 3,650 | 339.1 |
| 3,200 K · 23° Projection Lens | 3 | 519 | 48.2 |
| 3,200 K · 23° Projection Lens | 5 | 206 | 19.1 |
| 3,200 K · 23° Projection Lens | 7 | 109 | 10.1 |
| 5,600 K · Dome Softbox (angle N/A) | 1 | 1,936 | 179.9 |
| 5,600 K · Dome Softbox (angle N/A) | 3 | 276 | 25.6 |
| 5,600 K · Dome Softbox (angle N/A) | 5 | 116 | 10.8 |
| 5,600 K · Dome Softbox (angle N/A) | 7 | 68 | 6.3 |
| 3,200 K · Dome Softbox (angle N/A) | 1 | 1,647 | 153.0 |
| 3,200 K · Dome Softbox (angle N/A) | 3 | 231 | 21.5 |
| 3,200 K · Dome Softbox (angle N/A) | 5 | 98 | 9.1 |
| 3,200 K · Dome Softbox (angle N/A) | 7 | 58 | 5.4 |
| 5,600 K · 30° Fresnel flood | 1 | 100,780 | 9,362.8 |
| 5,600 K · 30° Fresnel flood | 3 | 10,230 | 950.4 |
| 5,600 K · 30° Fresnel flood | 5 | 3,677 | 341.6 |
| 5,600 K · 30° Fresnel flood | 7 | 1,884 | 175.0 |
| 3,200 K · 30° Fresnel flood | 1 | 96,610 | 8,975.4 |
| 3,200 K · 30° Fresnel flood | 3 | 9,600 | 891.9 |
| 3,200 K · 30° Fresnel flood | 5 | 3,326 | 309.0 |
| 3,200 K · 30° Fresnel flood | 7 | 1,690 | 157.0 |
| 5,600 K · 15° Fresnel spot | 1 | 121,510 | 11,288.6 |
| 5,600 K · 15° Fresnel spot | 3 | 11,360 | 1,055.4 |
| 5,600 K · 15° Fresnel spot | 5 | 4,100 | 380.9 |
| 5,600 K · 15° Fresnel spot | 7 | 2,037 | 189.2 |
| 3,200 K · 15° Fresnel spot | 1 | 105,680 | 9,818.0 |
| 3,200 K · 15° Fresnel spot | 3 | 10,250 | 952.3 |
| 3,200 K · 15° Fresnel spot | 5 | 3,650 | 339.1 |
| 3,200 K · 15° Fresnel spot | 7 | 1,810 | 168.2 |
Original Orion 300 FS data sheet and photometric tables.
The manufacturer’s Orion 300 FS data-sheet PDF supplies separate 3,200 K and 5,600 K readings at 1, 3, 5 and 7 m. The calculator follows the metric headings and is limited to 1–7 m. Intermediate readings are estimates. The original data sheet labels the 23° configuration Projection Lens in both its lux and foot-candle tables. The manufacturer’s web page instead labels that row Dome Softbox in its lux table, while retaining Projection Lens in its foot-candle table. The PDF’s consistent Projection Lens designation is used here; Dome Softbox is the separate configuration with no published beam angle. The table does not identify photometric dimmer, fan or supply settings.
Independent Measurements
Graham Sheldon’s CineD field test used the standard kit reflector and a Sekonic C-700U 3 ft from the fixture. His sample measured 5,329 K at a 5,600 K setting and 3,183 K at a 3,200 K setting, with less output at the warmer setting. His field conclusion was that the 300 FS is best suited to controlled ambient conditions when significant throw is needed. These readings are independent observations, not calculator inputs.
Power and controls
The controller accepts AC and handles the connection to the head. The full system is rated at 320 W maximum. CCT mode includes green-magenta correction.
Control, Cooling and Camera Operation
Check the fan at shooting output and microphone distance. Newsshooter’s FS review found Silent capped at 25% output. Start with the quietest mode that can sustain the needed level, then record a sound check and shoot the intended dimmed cue at production shutter and frame rate.
Optics and mounting
The Bowens mount supports the standard reflector and optional Fresnel. Confirm the specific accessory in any quoted output measurement.
Fixture Size and Working Package
The FS revision is distinct from the original Orion 300. The FS comparison documents the revised mount, yoke and cooling, and tests the optional 2× Fresnel separately from the kit reflector. For a battery run, check whether the actual supply has the V-mount or Gold Mount plate option and confirm compatible batteries rather than assuming the rental includes them.
Comparable fixture
For a higher-output full-colour Bowens head, see Aputure LS 600c Pro (Original).
What People Are Saying
Field Feedback at a Glance
What worked
- Allard metered 26,400 lux at 1 m with the open head at the 5,600 K setting. Matthew Allard ACS, Newsshooter.
- He found the onboard menus easy to use. Matthew Allard ACS, Newsshooter.
- Color temperature held steadier while dimming than on the original Orion 300 in his comparison. Matthew Allard ACS, Newsshooter.
Drawbacks to plan for
- Silent mode limits the fixture to 25% output on the dimmer. Higher fan speeds are more audible. Matthew Allard ACS, Newsshooter.
- The optional 2× Fresnel covers 12–30°, and its doors didn’t cut as cleanly as the HMI Allard compared it with. Matthew Allard ACS, Newsshooter.
- Sheldon found the stock reflector didn’t hit the selected daylight colour temperature. Check white balance with the exact optic you’ll shoot through. Graham Sheldon, CineD.
Matthew Allard ACS, Newsshooter
Allard found Low fan mode quiet and Medium usable for critical audio if the microphone was not right beside the fixture. Use flags when you need a cleaner cut from the optional Fresnel.
Field coverage and further reading
Video
LED Lighting Evolution Featuring the Prolycht Orion 300 FS – Video Light
Rental and used-fixture checks
Check the head cable and control box, and verify the modifier locks without play. Test the colour on wardrobe or props at the intended CCT and dimmer level.
Before You Book
- Book the exact FS head, controller, head cable, power lead and chosen optics together.
- Inspect the Bowens latch and yoke, then confirm the right focus range and expected output with the actual modifier.
- Run the camera and audio check at shooting level, then test the matched DMX personality or wireless setup.
