Aladdin ALL-IN 2

Last Updated 8 hours ago

Overview

Select a photo to enlarge.

The 600 × 300 mm format suits portable keys, concealed accents and low-profile set lighting. A rear control module reduces the separate dimmer hardware at the lamp, while wired DMX and LumenRadio depend on the appropriate accessories.

Discontinued model. Aladdin places the ALL-IN series in the legacy section of its support library. Confirm app operation, compatible controllers and replacement parts for the exact Color or BI panel.

Key specifications

Specification	Details
Primary version in this entry	ALL-2C Color
Emitter ratings	100 W variable white / 40 W RGB
Power consumption	140 W in the February 2024 Color manual
CCT range, Color version	2200–12,000 K in February 2024 manual
Manufacturer colour ratings	CRI 98 / TLCI 98
Panel dimensions	600 × 300 × 18 mm including built-in dimmer
Head mass	460 g in corrected manual
Input	12–15 V DC; matching 100–240 V AC power unit
Dimming / cooling	1–100%; passive
Control	Rear controls and Bluetooth; optional wired DMX / controller

Version	Distinction
ALL-2C Color	100 W white plus 40 W RGB; saturated colour available.
ALL-2BI	100 W variable-white version; no RGB emitters.
Basic / Gaffer / multi-light kits	Bundle contents change; check frame, softbox, grid and controller rather than treating each kit as a different lamp.

Strengths and limitations

Strengths

• Built-in rear dimmer
• Color and BI choices
• Portable fabric head

Limitations

• The controller creates a thicker area on the otherwise flexible panel.
• The BI version cannot produce the Color model’s saturated RGB effects.
• The head, supply, cabling and support still need independent inspection.

Practical uses

Portable interview key. The longer face gives a wider key or a narrow vertical reflection. Add the matching diffuser and place the source close enough for the intended wrap.

Concealed colour. With the Color version, hide the mat in a recess or set feature and use the app to trim the look. Maintain airflow and access to the cable connection.

Interactive practical. Use an app effect for a small fire, screen or passing-light motivation. Judge it on the subject and camera rather than only by looking at the LED face.

Back to contents

Output and colour

Use the model-specific photometric chart linked below for the Color panel. The white and RGB wattage ratings describe different emitter groups and are not interchangeable measurements of useful illuminance.

Older launch coverage and manuals use different white-range and power figures. This entry follows the February 2024 Color manual; use the separate BI panel label and control profile when matching a variable-white-only unit.

View Aladdin’s model-specific photometric chart.

Back to contents

Power and batteries

The corrected Color manual specifies 12–15 V DC. Use the correct Aladdin adapter or approved battery lead and observe the maximum input on the actual head.

A 140 W nominal load requires more than a battery with enough stored energy: its continuous output and the lead rating must also be adequate. Secure the battery and strain-relieve the cable so the connector does not carry its weight.

Control, cooling and camera operation

Bluetooth app control and rear buttons are part of the ALL-IN design. Wired DMX requires the appropriate attachment or controller. The optional ALL-WDIM adds its own physical controls and LumenRadio capability; that does not make every bare ALL-IN head a native radio receiver.

The corrected manual lists 1–100% dimming, with separate two-channel white and three-channel RGB control descriptions. Patch the actual controller profile, and test fades and the route to blackout before rigging. Test app compatibility on the phone intended for the job.

BI, Color and controller profiles

Identify the BI or Color label before patching. The corrected head manual’s two-channel white / three-channel RGB description belongs to that documented configuration. The December 2025 map also lists later eight- and eleven-channel personalities for ALL-IN Color; use them only where the actual controller and firmware offer those modes. A matching brand name does not establish a matching patch.

Keep a test cue for white, RGB, blackout and the required low fade with the package. An optional radio dimmer, an app-capable head and a wired DMX attachment are distinct control routes; confirm which one is present in a used kit.

Back to contents

Modifiers, rigging and the working package

The nominal 1×2 accessory system includes the matching holder or frame, diffuser, softbox and grid choices. A Gaffer Kit adds shaping tools to the basic package; the presence of a fabric panel alone says little about the working kit.

Use the designed attachment points and keep the rear control module clear of sharp bends. Protect the emitting face, support the battery separately and follow the manufacturer’s folding and storage instructions.

Back to contents

Alternatives and related fixtures

Fixture	Choose it for
Aladdin BI-FLEX M7	A square bi-colour mat with a separate dimmer.
amaran F21c	A different rectangular colour-mat system.
ALL-IN 1	Discontinued ALL-IN 1: 300 × 300 mm with controls on the head. BI and Color are different versions; the corrected Color manual lists 70 W consumption.
MOSAIC MINI 1×2	300 × 600 mm RGBWW mat, 100 W white / 20 W RGB. A longer reflected shape than MINI 1×1, with the model-specific supply and supports.
BI-FABRIC 2	300 × 600 mm, 100 W bi-colour fabric head. A rectangular white source with its own controller and revision-specific power details.

Back to contents

What people are saying

Fauzee Nasir: Aladdin-published Human Cargo account.

In Aladdin’s published production account, gaffer Fauzee Nasir describes using ALL-IN 1 and 2 RGB panels for an app-controlled fire-light effect on a small crew. Read the source.

Back to contents

Videos

Aladdin ALL-IN: how to use the app

Manufacturer app tutorial for the ALL-IN family.

Back to contents

Rental and used-fixture checks

Confirm ALL-2C or ALL-2BI on the head. A similar-looking BI model does not gain RGB when connected to the Color app.

Run warm white, cool white and every RGB channel on a Color panel. Inspect the fabric and rear controls, then test the supply, battery lead, app, controller and required DMX attachment.

Documentation and specifications

• ALL-IN 2 manufacturer manual, February 2024
• ALL-IN controller manual
• Manufacturer catalogue and variants
• Aladdin legacy support library

Browse Aladdin lights, LED mats or the equipment directory.

Back to contents