Aladdin BASE-LITE 100

Last Updated 8 hours ago

Overview

Select a photo to enlarge.

Unlike a flexible mat, the BASE-LITE carries its structure at the lighting position. That makes a fast stand-mounted setup straightforward, but head mass and yoke condition matter when assessing a used package.

Earlier model. This entry documents an older Aladdin fixture. Check replacement parts, batteries and controller support before buying a used kit.

Key specifications

Specification	Details
LED source	100 W bi-colour
CCT range	2900–6300 K
Manufacturer colour ratings	CRI 98 / TLCI 98
Published beam angle	140°
Dimming	1–100%
Cooling	Passive
Body face dimensions	430 × 300 mm
Published fixture mass	2.3 kg
DC input reference	12–30 V
Power unit reference	90–260 V AC
Control	Local intensity / CCT and built-in DMX
Battery versions	V-mount or Gold-mount configurations

Strengths and limitations

Strengths

• Rigid ready-to-mount body
• Removable diffuser
• Built-in DMX

Limitations

• More weight at the stand than a bare fabric head.
• Modifier changes affect output and reflected LED visibility.
• No native Bluetooth or radio capability is established by the specification sheet.

Practical uses

Interview key. Fit the diffuser, place the panel near the subject and control spill with the correct grid or flags. Match the practical light direction before setting exposure.

Studio fill. Use local controls for a standalone setup or patch DMX for repeatable cues. Check the low end and the response of the actual unit.

Product lighting. Use the diffused face for a clean rectangular reflection. Removing diffusion can increase level while making individual emitters more visible in glossy surfaces.

Back to contents

Output and colour

The following manufacturer figures come from the BASE-LITE specification sheet. The sheet does not identify a diffuser configuration beside the table, so do not assign those readings to an unspecified bare or diffused setup.

The beam-angle figure describes broad output. Barn doors and a honeycomb help limit spill, but they do not create the focused edge and throw of a profile or Fresnel.

Setting	0.6 m	1 m	2 m	3 m
6000 K	6800	2700	840	450
4200 K	6800	2600	840	420
3000 K	5500	2000	700	340

Back to contents

Power and batteries

The specification sheet lists 12–30 V at the dimmer and a 90–260 V AC power-unit range. Match the actual fixture, battery plate and adapter labels before connecting power.

At this 100 W rating, battery discharge capability matters alongside Wh capacity. A battery with the correct mount may still be unsuitable for the load. Inspect the plate and contacts for secure fit and signs of heating.

Control, cooling and camera operation

Built-in DMX is documented, along with local dimming and colour adjustment. Check the address, control mode and signal-loss behaviour on the unit; use the correct manual for the controller revision.

The passive body needs clear airflow. Do not assume rain protection from the metal shell, and test the intended frame rate, shutter and dimming level before a critical shot.

Back to contents

Modifiers, rigging and the working package

The manufacturer lists a removable diffuser, barn doors and honeycomb grids. Check the correct size and fastening method for the 100 W or 200 W housing.

Inspect the yoke, tilt locks and stand interface before loading the fixture. Secure accessories and dress the power and DMX cables so they do not pull the tilt position or stand.

Rigid panel versus a fabric-head package

The housing, yoke and removable diffusion form a self-contained rigid source. Compare the actual stand load and transport size with a flexible mat plus its separate support, dimmer and supply. A rectangular fabric head can create a similar reflection, but its controller mounting and handling requirements are different. Check yoke locks, diffuser retention and the battery-mount version on an older BASE-LITE kit.

Back to contents

Alternatives and related fixtures

Fixture	Choose it for
Nanlite PavoSlim 120C	A thin colour panel with a separate controller.
Kino Flo FreeStyle 21	Another broad soft-source system.
BASE-LITE 200	Earlier 200 W rigid bi-colour panel, about 3.8 kg. A larger rigid package than BASE-LITE 100; check the battery-mount and supply version.
BI-FABRIC 2	300 × 600 mm, 100 W bi-colour fabric head. A rectangular white source with its own controller and revision-specific power details.
MOSAIC MINI 1×2	300 × 600 mm RGBWW mat, 100 W white / 20 W RGB. A longer reflected shape than MINI 1×1, with the model-specific supply and supports.

Back to contents

Rental and used-fixture checks

Inspect the housing, yoke, tilt locks, diffuser tracks, accessory fasteners and battery plate. Run both white channels and look for dark or mismatched LED regions.

Test local controls, wired DMX, AC power and the intended battery. Confirm that the adapter, diffuser, grid and barn doors belong to the correct body size.

Documentation and specifications

• Ushio / Zylight Aladdin BASE-LITE specification sheet
• Aladdin 2018/19 catalogue

Browse Aladdin lights, LED panels or the equipment directory.

Back to contents