Aputure INFINIMAT 1×2

Overview

The clear airbag is a physical support for interchangeable diffusion. Older INFINIMAT kits used a different softbox arrangement, so identify the supplied airbag and cloth before comparing published output or ordering replacement parts.

Select a photograph to view it at full size.

Key specifications

Specification	Details
Nominal fixture class	100W
Maximum electrical consumption	111W
Listed LED power output	81W
CCT / colour	2,000–10,000K; full-colour mixing and tint adjustment
Colour references	CRI ≥96; TLCI ≥97; SSI tungsten 84 / D56 73
Pixels	1
Standard controller	400W INFINIMAT controller package
Mat size	66 × 34cm
Mat / clear-airbag weights	1.00kg / 0.59kg
Controller weight	7.2kg
Weather / operating temperature	IP65; −20°C to 50°C
Control	Onboard, Sidus Link / Link Pro, DMX/RDM, CRMX, Art-Net/sACN

Technical reference: Aputure product information and downloads.

Strengths and limitations

Strengths

• A shallow diffused face is useful where a deeper softbox would obstruct the set.
• Removable diffusion, skirt and grid allow the output and spill to be adjusted as a package.
• Full-colour and pixel control support practical-light and moving-colour motivation.

Limitations

• One pixel provides one colour zone. Its modest output and small face suit close work rather than a large, distant key.
• The lamp-mat weight excludes the controller, airbag, accessories and support.
• The inflatable component needs protection from abrasion, punctures and unsuitable contact surfaces.

Practical uses

Setup	Working approach
Close interview fill	Place the diffused face close to the subject, controlling spill with the skirt and grid. The small face becomes less soft as it moves farther away.
Tight product setup	Use the compact rectangle to place a broad reflection on a small object. Rotate it to change the reflection shape instead of only changing intensity.
Constrained interior	Use the approved bracket or rigging points to put the source where a deeper COB softbox would be awkward. Keep the controller outside the restricted space.

Back to contents

Output and colour

The readings below refer to the current clear airbag with its named diffusion cloths. They should not be substituted for the older softbox table. Rigid-softbox configurations also have separate published figures.

Choose the diffusion from the required source appearance, then meter at the subject. The labels “1 stop” and “2 stop” identify cloth options; the complete airbag, cloth and grid combination determines the measured output and spread.

CCT	Distance	1-stop (lux)	1-stop + grid (lux)	2-stop (lux)	2-stop + grid (lux)
3,200K	1m	2,215	1,739	1,785	1,336
3,200K	3m	229	179	179	148
5,600K	1m	2,426	1,907	1,976	1,465
5,600K	3m	251	197	197	163

Published photometrics: measurement configurations and full output tables.

Tests and demonstrations

Identify the airbag generation during prep. Compare the published configuration with the actual diffusion, grid, colour and distance before relying on its exposure figure. For matching, look at skin, wardrobe and reflective set materials through the production camera.

Back to contents

Power and batteries

The published maximum consumption for this configuration is 111W. The nominal 100W fixture label and the controller model name do not describe the same electrical quantity.

INFINIMAT controllers can operate supported combinations of mats. Both total capacity and the permitted load at each port matter; the number of sockets is not the number of full-power mats that can always be connected. Use the configuration table for the exact controller.

For battery or other DC operation, confirm the controller version, approved voltage/current, cable and permitted output level. Do not assume a small camera-battery pair can deliver the AC photometric specification. Include the controller’s conversion losses and power limit when estimating runtime.

Back to contents

Control, cooling and camera operation

The control box provides local operation, Sidus app control, wired DMX/RDM, CRMX reception and Ethernet lighting protocols. The mat connects to that controller; it is not an independent Bluetooth fixture.

This size has 1 controllable pixel. It provides a single colour zone rather than spatial pixel effects. Keep the pixel map and channel footprint in the lighting notes.

The mat has no local fan assembly like a conventional monolight, but the controller uses cooling fans. Keep the controller ventilated and listen to it at the microphone position. Test low fades and any high-speed camera settings with the installed firmware and the complete cue.

Back to contents

Modifiers, rigging and the working package

Component / accessory	Package considerations
Raised lamp package	The 1kg mat is only the lamp component. Add the airbag, diffusion, skirt, grid, bracket and cable before deciding how to mount it.
Controller	400W package; 7.2kg. Position and support it independently of the lamp cable.
Diffusion and spill control	Correct-size clear airbag, 1-stop or 2-stop cloth, skirt and grid.
Head cable	Use the supported cable and connector for this mat/controller class; include cable weight and strain relief in the rig.
Air pump and repair kit	Allow setup access to valves, the specified pump and the supplied patch materials.
Mat-only versus complete kit	An LED & Clear Softbox Pack omits the controller; verify the exact rental or purchase contents.

An inflated airbag is not a structural suspension point unless the manufacturer specifically identifies it as one. Use the approved frame, bracket or rigging points, and protect the airbag from sharp edges.

Leave room to inspect inflation and lower the fixture for service. A large soft surface also catches air movement; weather sealing of the electronics does not remove the mechanical effect of wind.

Back to contents

Alternatives and related fixtures

Fixture	When to compare it
amaran F21c	A compact full-colour mat alternative with a different mounting and control package.
Aputure MC Pro	A much smaller accent light when concealment matters more than source area.
amaran F22c	A larger mat face when a small close source will not provide enough coverage.

Back to contents

What people are saying

LensVid at IBC 2024. Its interview with Ted Sim demonstrates INFINIMAT’s large-array concept and pixel-control workflow. Read the family demonstration.

Setup demonstration. Aputure’s current product page includes an INFINIMAT setup tutorial. It covers the system’s assembly rather than claiming a separate independent output test of this size.

Videos

Aputure: INFINIMAT family preview at NAB 2024. Manufacturer system demonstration; the current clear-airbag package is documented separately below.

Back to contents

Rental and used-fixture checks

• Confirm the mat size, controller model and supported port configuration.
• Identify clear-airbag versus older softbox components and match the diffusion and grid.
• Inflate the airbag and inspect valves, seams and contact points before installation.
• Inspect mat backing, mounting hardware, cable strain relief and connectors.
• Test every pixel and the required DMX or wireless-control path.
• Warm the controller, check fan noise and test the intended dimming cue.
• Include all brackets, cables, pumps, patch materials and cases in the order.

Documentation and specifications

• Aputure product specifications, kit options and firmware downloads
• Product manual (PDF)
• DMX profiles (PDF)
• Manufacturer data sheet (PDF)
• Controller combinations and complete system options

Back to contents

Browse Aputure lights · LED mats · all equipment.