Last Updated 5 hours ago
fos/4 Fresnel 7 Overview





The ETC fos/4 Fresnel 7 is a 7-inch LED Fresnel for controlled studio and location lighting. Its mechanically adjustable beam suits keys, backlights and motivated sources that need more direction than a soft panel. Lustr X8 and Daylight HDR versions provide full-colour and tunable-white alternatives respectively.
- LED Fresnel Lustr X8 or Daylight HDR
- Power 177.7 W Lustr X8; 219.8 W Daylight HDR, at 120 V AC
- Colour Temperature 1,900–10,450 K
- Weight 11.1 kg
- Beam Angle 13–55°
- IP Rating IP20 · indoor dry locations. IP ratings guide.
fos/4 Fresnel 7 Specifications
| Specification | Details |
|---|---|
| Light engine | Lustr X8 full colour or Daylight HDR tunable white |
| White-light range | 1,900–10,450K |
| Optical system | 7 inch glass Fresnel lens |
| Beam coverage | 13–55° |
| Typical input at 120V | 177.7 W Lustr X8; 219.8 W Daylight HDR (Direct at Full) |
| Published weight | 11.1kg; see working-package notes |
| DC operation | 24–36V DC; maximum output may be reduced |
| Protection | IP20; indoor dry-location equipment |
| Control | 5-pin DMX/RDM; Multiverse on equipped models; NFC configuration |
| Model codes | fos4FL7 (Lustr X8); fos4FD7 (Daylight HDR) |
| Flicker settings | 5 and 25 kHz in the original datasheet; v1.4.0 added an 11 kHz option. Confirm firmware. ETC’s firmware compatibility table. |
fos/4 Fresnel 7 Output Calculator
Estimate centre-beam output or compare two settings at the same throw. The calculator uses candela from the ETC fos/4 Fresnel 7 datasheet, rev D, pp. 10–15. These are 7-inch readings only. The two engines are compared at their own measured focus positions. Both engines use ETC’s Studio mode labels; the separate specifications and flux section cite the newer family sheet.
Camera Settings
At 5 m (16.4 ft) in spot, Lustr X8 (fos4FL7) · 5,600 K Studio Brightest gives about 3,209 lx at beam centre; Daylight HDR (fos4FD7) · 5,600 K Studio Brightest gives about 4,184 lx. The reference table works without JavaScript.
Published intensity data and calculation method
Lux = candela ÷ distance in metres squared. Foot-candles = lux ÷ 10.7639. The camera estimate uses f-number = √(lux × ISO × shutter time ÷ meter reference). The small digit is tenths of a stop, not a T-stop.
The 3 m floor matches the closest main throw listed in the rev D tables; it is not an accuracy guarantee. Beyond that, these are inverse-square estimates at beam centre, not measurements or coverage predictions. Only ETC’s published focus and output settings are included; diffusion, accessories and dimming are not modelled. Meter the working setup.
| Focus | Lustr X8 (fos4FL7) · 3,200 K Studio Brightest | Lustr X8 (fos4FL7) · 3,200 K Studio Spectral | Lustr X8 (fos4FL7) · 4,500 K Studio Brightest | Lustr X8 (fos4FL7) · 4,500 K Studio Spectral | Lustr X8 (fos4FL7) · 5,600 K Studio Brightest | Lustr X8 (fos4FL7) · 5,600 K Studio Spectral | Daylight HDR (fos4FD7) · 3,200 K Studio Brightest | Daylight HDR (fos4FD7) · 3,200 K Studio Spectral | Daylight HDR (fos4FD7) · 4,500 K Studio Brightest | Daylight HDR (fos4FD7) · 4,500 K Studio Spectral | Daylight HDR (fos4FD7) · 5,600 K Studio Brightest | Daylight HDR (fos4FD7) · 5,600 K Studio Spectral |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Spot | 80,489 | 45,200 | 90,348 | 69,580 | 80,237 | 66,840 | 57,095 | 43,046 | 104,022 | 67,184 | 104,591 | 66,594 |
| Mid | 31,947 | 18,221 | 36,030 | 27,623 | 32,014 | 26,775 | 24,501 | 18,707 | 44,538 | 28,812 | 45,439 | 28,501 |
| Flood | 10,408 | 5,842 | 11,642 | 8,959 | 10,258 | 8,611 | 7,752 | 5,761 | 13,789 | 8,993 | 14,038 | 8,857 |
Strengths and Limitations
| Aspect | Working implication |
|---|---|
| Strength | Adjustable coverage without replacing the whole head. |
| Strength | NFC setup and a console control path for repeatable programming. |
| Limitation | Wash optics cannot project sharp gobos or shutter cuts. |
| Limitation | Active cooling and IP20 protection require attention to sound and location conditions. |
Practical Uses
- A controlled dialogue key or studio backlight with room to adjust the beam between takes.
- Spot into a bounce for a contained patch of soft light, then meter the bounce rather than relying on a bare-head reading.
- For a motivated window source, set the lens position first, adjust position for coverage and use barn doors or external flags for spill.
The lens is a true Fresnel with a soft-edged adjustable beam. Focus can be adjusted from the front or rear. Barn doors shape spill, but they do not give the sharply imaged cuts or projected patterns of a Source Four profile.
Output and Colour
| Manufacturer reference | Published value |
|---|---|
| Lustr X8 published maximum flux | 7,714 lumens |
| Daylight HDR published maximum flux | 9,703 lumens |
| Beam adjustment | 13–55° |
Lumen ratings describe total flux, while lux describes light arriving at a surface. Do not read the flux table as a lux measurement at a particular distance. Use ETC’s linked photometry for the exact array, lens, focus and diffusion configuration. Meter the working setup after adding colour, diffusion or other modifiers.
Lustr X8 combines deep red, red, amber, lime, green, cyan, blue and indigo for full-colour mixing. Daylight HDR uses a different six-colour array for tunable white. The identical Kelvin range does not mean that the two versions have the same gamut or output. Record array, colour settings and spectral/output preference when matching units.
Power and Batteries
The 7-inch Lustr X8 draws 177.7W typically at 120V; the Daylight HDR version is listed at 219.8W. These are typical measured inputs, not interchangeable maximum ratings. Battery operation requires the specified 24–36V DC connection and a supply capable of the required current.
Check the supply lead, grounding, connector rating and total circuit load. Published fixture-per-circuit counts assume a particular breaker and supply condition; they are not a universal instruction for every outlet or distribution system. Account for startup current as well as steady running draw.
Control, Cooling and Camera Operation
| Control path | Operation |
|---|---|
| Wired control | 5-pin DMX and RDM. Match operating mode and DMX footprint to the console profile. |
| Wireless control | City Theatrical Multiverse on equipped versions. It is a different system from CRMX; confirm the transmitter and receiving hardware. |
| NFC | ETC Set Light configures supported fixture properties at close range. NFC setup is separate from continuous wireless DMX control. |
| Cooling and PWM | Active fan cooling; use the specified frequency choices and test the actual fan setting, dimming level, shutter and frame rate. |
Test low-level fades as well as full output. A high PWM frequency alone does not prove flicker-free results at every frame rate and shutter combination. Listen to the fan at the microphone position after the fixture has reached working temperature. Save cooling, colour and operating-mode settings with the lighting notes.
Modifiers, Rigging and the Working Package
The 7-inch lens needs its own compatible colour frame and barn doors. The nominal lens diameter is not the accessory-frame size. Include the yoke, junior pin, power lead and fitted modifiers in the working load.
IP20 describes an indoor fixture, so plan a suitable dry environment. Keep vents unobstructed and follow the regional manual’s mounting and clearance instructions. For overhead work, use the designated mounting and secondary attachment points with hardware rated for the complete assembly.
Alternatives and Related Fixtures
Other sizes in the fos/4 Fresnel family: ETC fos/4 Fresnel 5.
| Compare | When it helps |
|---|---|
| ETC fos/4 Fresnel 10 | Choose the larger 10-inch optic or need to compare more output. Check its own photometric table and accessory dimensions. |
| ETC Source Four tungsten | A tungsten profile when shutter cuts and pattern projection matter; it needs an appropriate lamp and external dimming. |
| ETC lighting hub | Compare ETC’s panel, Fresnel and profile formats by the beam needed for the job. |
| All equipment | Compare other manufacturers with the same source size, working distance and modifier. |
What People Are Saying
Levi Whitney’s hands-on UpHill Cinema review covers both Fresnel and panel operation. ETC’s 7-inch launch notice identifies the 7-inch as the original size; these early production experiences don’t establish output or cooling behaviour on the later 10-inch.
What crews found useful
- Matching existing sources quickly. Cinematographer Sammy Paravan and gaffer Francesco Buonocore used the FL7 Lustr X8 alongside PL8 and PL16 panels. In ETC’s Italian production interview, Paravan explains why the mixed package mattered: the crew had to recreate natural light and practicals on a tight schedule. His account is about the package, not an isolated spectral test of the FL7.
- Adding a controllable fill in a tight spot. For WarnerMedia’s 2021 upfronts, lighting designer Seth Bernstein describes getting a fos/4 Fresnel low enough to fill a face when set reflections ruled out a larger soft source at eye level. The ETC article published in 2022 does not specify the array; the 7-inch was the contemporary Fresnel, before FL10/FD10 firmware support appeared.
- Keeping lights quiet during a concert recording. In ETC’s account from Gdańsk, rental owner Przemysław Waszkiewicz reported quiet operation after six hours, and operator Krzysztof Kowalski described tuning the light to suit the camera and daylight. This is a reported result on that job, not a promise of silence at every fan setting.
Documented checks before a rental
- Early zoom springs. A pre-December 2021 head can drift when aimed down with a heavy accessory, as ETC’s zoom-spring service note explains. Check the actual build date and confirm it holds focus with the working barndoors or frame.
- Hardware matters for software. ETC’s firmware compatibility table lists FL7/FD7 CPU2 for v1.4.1, not original CPU1 heads. Identify the board and load the correct firmware and console profile, rather than assuming every rental FL7/FD7 can use the same update.
- The two engines trade off colour and output. In ETC’s model documentation, the 7-inch Lustr X8 leads Daylight HDR at 3,200 K in flood (6,198 versus 4,948 lm), but Daylight HDR leads at 5,600 K (8,979 versus 5,701 lm). Do not choose between them from their shared CCT range alone. These are manufacturer flux values, not user-measured lux.
Videos
ETC’s fos/4 Fresnel demonstration shows the family’s controls and zoom layout. Use the specification and calculator on this page for the 7-inch model and its installed array.
Rental and Used-Fixture Checks
- Confirm the model label, array and regional power rating; housing appearance alone may not identify the light engine.
- Inspect the Fresnel lens, focus travel, barn-door retention and yoke lock.
- Test every colour channel, low-level fades, fan operation and the intended wired or wireless control mode.
- Check firmware against the manufacturer’s support notes and run the required camera test before rigging.
- For an early head, ask ETC to verify the build date from its serial number. ETC’s service note says the original zoom springs could let focus drift when the Fresnel pointed down with a heavy front accessory. The longer springs entered production on December 2, 2021. Confirm the head holds focus at the intended angle with the actual accessory fitted.
Documentation and Specifications
ETC colour-calibration modes · ETC fixture directory and photometry downloads
Photographs: ETC. Family photographs and shared housing details are identified in their captions.
Browse ETC lighting · all equipment.