Aladdin ALL-IN LINE

Last Updated 7 hours ago

Overview

Aladdin ALL IN LINE – fixture

The Aladdin ALL-IN LINE is a long, narrow 165 W RGBWW mat in the nominal 1×3-foot class. It provides a strip-shaped white or coloured source for overheads, product reflections and locations where a square panel occupies the wrong shape of space.

Select a photo to enlarge.

Aladdin’s 2022 catalogue places it alongside the MOSAIC family and lists a 48 V power arrangement. Its ALL-IN name should not be used to borrow the 12–15 V supply specification of the smaller ALL-IN 1 or 2.

Earlier model. This entry documents an older Aladdin fixture. Check replacement parts, batteries and controller support before buying a used kit.

Key specifications

SpecificationDetails
Light engine165 W RGBWW
Panel format880 × 300 mm
Published beam angle140°
Manufacturer colour ratingCRI 95
Dimming0–100%, 1% resolution in 2022 catalogue
CoolingPassive
Power48 V DC; matching 100–240 V AC supply
ControlBluetooth; DMX / LumenRadio through matching control hardware
Model codeALL-LINE-PANEL / ALL-LINE-KIT
Aladdin 2022 product catalogue.

Strengths and limitations

Strengths

  • Long reflected shape in a compact mat
  • RGBWW operation
  • Thin emitting face

Limitations

  • Needs the correct long frame and diffuser.
  • The name does not identify a self-contained battery system.
  • The separate 48 V power equipment remains part of the package.

Practical uses

Product strip reflection. Use the long face to make a narrow highlight in glass, metal or glossy packaging. Position the panel from the camera’s reflection angle before setting exposure.

Counter overhead. Place the long side above the working area and shape the sides with flags or a grid. Check uniformity across the subject’s movement.

Concealed colour. Use the mat behind a set feature when a long colour accent is required. Keep the head and its cabling supported without trapping heat.

Back to contents

Output and colour

The 2022 catalogue gives the illuminance readings below, with its measured CCT labels. A measured warm setting in a photometric table is not, by itself, a full specification of the available CCT control range.

Diffusion and a grid reduce the usable level. A narrow rectangular reflection can be the main reason to choose this source even when a larger square mat has a higher white-light rating.

Setting0.6 m1 m2 m3 m
Daylight, 6290 K49802160666405
Tungsten, 2750 K57902520769352
Manufacturer illuminance figures, in lux. Measurement reference.

Back to contents

Power and batteries

Use the model-specific 48 V supply and controller package. Do not directly connect the 12–15 V battery lead of an ALL-IN 1 or 2 to an unidentified ALL-IN LINE system.

Check the rating on the actual PSU and panel, inspect both power and control extensions, and support the supply separately. For a used kit, replacement electrical parts are as important as the condition of the mat.

Control, cooling and camera operation

The catalogue lists Bluetooth, wired DMX and LumenRadio in the MOSAIC-style accessory arrangement. Check the supplied wired dimmer and connection standard before planning console control.

Test local operation, phone pairing, a static white setting, each RGB channel and the low-end fade. Preserve airflow around the mat and controller, and keep the emitting face free of sharp creases.

Planning an ALL-IN LINE package

The 165 W LINE is a 48 V RGBWW system; its long format and power path differ from the low-voltage square ALL-IN heads. Pair the line panel with its approved supply and control hardware. For a console, use the profile supplied for that dimmer and revision rather than borrowing the compact ALL-IN 1/2 patch from a rental inventory.

Back to contents

Modifiers, rigging and the working package

The ALL-IN LINE uses the long 1×3 frame and matching diffuser rather than a square 1×1 holder. Check whether a used package includes the grid, complete frame, supply and controller.

Orient the long side to suit the reflected shape or playing area. Supporting only one end of a long flexible head can allow sagging, so use the intended attachment points and keep cable strain off the panel.

Back to contents

Alternatives and related fixtures

FixtureChoose it for
LiteMat Plus 2LA long variable-white source.
amaran F21cA rectangular RGBWW mat with a different electrical package.
MOSAIC 2×4550 × 1100 mm RGBWW mat rated 350 W white / 250 W RGB; a smaller large-format source than the 600 W MOSAIC heads, with its own frame and 48 V supply.
WHIP-LITE3340 × 170 mm bi-colour fabric strip. Its very long, narrow face suits extended reflections; the 2022 manual separates its 120 W emitter description from 140 W consumption.
CAPE-LITE1700 × 320 mm, 120 W bi-colour fabric source. A shorter, wider alternative to WHIP-LITE, with its own support and modifier dimensions.

Back to contents

Videos

Aladdin MOSAIC system setup

Related-family guide: confirm ALL-IN LINE-specific power and frame parts separately.

Back to contents

Rental and used-fixture checks

Verify ALL-LINE on the panel and match the 48 V power equipment. Test every LED region and inspect the rear cable and controls.

Check the long frame, diffuser, grid, dimmer, power supply and case. Confirm app and radio operation with the actual controller rather than relying on the family name.

Documentation and specifications

Browse Aladdin lights, LED mats or the equipment directory.

Back to contents