Aputure CF10 Fresnel and Barn Doors Kit

Last Updated 1 day ago

Aputure CF10 Fresnel and Barn Doors Kit

The CF10 gives the STORM 700x a 10-inch Fresnel with a 15° spot and a 40° flood. It is a good choice when a window, doorway or distant bounce needs more level than the standard reflector delivers, and the crew still needs to shape the edges with barn doors.

Order code
AA0706039T
Focus travel
15° spot to 40° flood
Rear mount
Bowens

Compatible fixtures

Aputure designed the CF10 for the STORM 700x. It also lists the STORM 400x, LS 600x Pro and both generations of the LS 600c Pro. The original 600c appears in the compatibility list, but the published CF10 output table gives figures for the 600c Pro II. Use the row for the head on the truck.

Key specifications

SpecificationDetails
Lens / mount10-inch Fresnel, Bowens rear mount
Focus travel15° spot to 40° flood
Front controlEight-leaf CF10 barn doors with an 11-inch scrim holder
Kit contentsCF10, barn doors, safety chain and soft case
Order codeAA0706039T. The STORM 700x Cine Kit also includes the CF10.

Output at 3 m

Aputure gives the following centre readings at 5,600 K. The difference between spot and flood is most apparent on the meter. On set, it also changes how much of the window or bounce the beam fills.

Fixture at 5,600 K15° spot40° flood
STORM 700x56,200 lux11,900 lux
STORM 400x37,600 lux5,640 lux
LS 600x Pro47,800 lux5,080 lux
LS 600c Pro II30,200 lux5,180 lux

Independent testing

Matthew Allard measured 53,200 lux at 3 m with the 700x set to 5,600 K, maximum output and 15° spot. He measured from the front of the Fresnel. His setup gives a useful independent comparison with Aputure’s 56,200 lux figure. Read the full test at Newsshooter.

Practical uses

For a shaft through a window, start wide enough to cover the part of the window in shot. Set the focus first, then use the leaves to keep light off the near wall and ceiling. For a bounce, sight the beam at the corners of the bounce as well as the centre. A bright patch in the middle wastes part of the reflecting area.

Rental and used-gear checks

  • On a rental pull, ask for the CF10 doors by name.
  • Open each leaf, run the focus from end to end, then try the intended scrim in the holder.
  • An F10 booking refers to a different Fresnel.
  • Record the head, distance and focus position when passing the setup to another crew.

Video

CF10 kit unboxing

Back to contents