Last Updated 1 day ago

The CF10 gives the STORM 700x a 10-inch Fresnel with a 15° spot and a 40° flood. It is a good choice when a window, doorway or distant bounce needs more level than the standard reflector delivers, and the crew still needs to shape the edges with barn doors.
- Order code
- AA0706039T
- Focus travel
- 15° spot to 40° flood
- Rear mount
- Bowens
Compatible fixtures
- Aputure Storm 700x
- Aputure STORM 400x
- Aputure Light Storm LS 600x Pro
- Aputure LS 600c Pro (Original)
- Aputure LS 600c Pro II
Aputure designed the CF10 for the STORM 700x. It also lists the STORM 400x, LS 600x Pro and both generations of the LS 600c Pro. The original 600c appears in the compatibility list, but the published CF10 output table gives figures for the 600c Pro II. Use the row for the head on the truck.
Key specifications
| Specification | Details |
|---|---|
| Lens / mount | 10-inch Fresnel, Bowens rear mount |
| Focus travel | 15° spot to 40° flood |
| Front control | Eight-leaf CF10 barn doors with an 11-inch scrim holder |
| Kit contents | CF10, barn doors, safety chain and soft case |
| Order code | AA0706039T. The STORM 700x Cine Kit also includes the CF10. |
Output at 3 m
Aputure gives the following centre readings at 5,600 K. The difference between spot and flood is most apparent on the meter. On set, it also changes how much of the window or bounce the beam fills.
| Fixture at 5,600 K | 15° spot | 40° flood |
|---|---|---|
| STORM 700x | 56,200 lux | 11,900 lux |
| STORM 400x | 37,600 lux | 5,640 lux |
| LS 600x Pro | 47,800 lux | 5,080 lux |
| LS 600c Pro II | 30,200 lux | 5,180 lux |
Independent testing
Matthew Allard measured 53,200 lux at 3 m with the 700x set to 5,600 K, maximum output and 15° spot. He measured from the front of the Fresnel. His setup gives a useful independent comparison with Aputure’s 56,200 lux figure. Read the full test at Newsshooter.
Practical uses
For a shaft through a window, start wide enough to cover the part of the window in shot. Set the focus first, then use the leaves to keep light off the near wall and ceiling. For a bounce, sight the beam at the corners of the bounce as well as the centre. A bright patch in the middle wastes part of the reflecting area.
Rental and used-gear checks
- On a rental pull, ask for the CF10 doors by name.
- Open each leaf, run the focus from end to end, then try the intended scrim in the holder.
- An F10 booking refers to a different Fresnel.
- Record the head, distance and focus position when passing the setup to another crew.