Last Updated 12 hours ago
P300R Overview



The Godox KNOWLED P300R is a square, full-colour soft panel with four independently controllable zones. It can serve as a single interview key or put different colours across a face or reflective surface. With the diffuser fitted at 5,600 K, Godox measures 1,620 lux at 3 m. The 11.6 kg fixture weight matters when choosing a stand or positioning the light above a set.
- Fixture Type4-zone soft RGBWW LED panel. Learn about RGBWW.
- Power RequirementApproximately 350 W maximum; 100–240 V AC or a compatible external 48 V DC supply.
- Colour Temperature1,800–10,000 K Adjustable green/magenta tint.
- Weight and MountApprox. 11.6 kg.
- Beam ControlSquare soft face with diffuser; use compatible diffusion and light-control accessories to shape coverage.
- IP RatingNo numeric ingress rating specified in the linked operating manual. Keep the fixture dry. IP Rating Guide.
P300R Specifications
| Specification | Details |
|---|---|
| Fixture | 4-zone soft RGBWW LED panel |
| White point | 1,800–10,000 K, green/magenta adjustment |
| Maximum power | Approx. 350 W (Godox manual) |
| Power connection | 100–240 V AC, 50/60 Hz, 3.5 A, or external 48 V DC |
| Colour rendering | CRI ≥96, TLCI ≥96 |
| Dimming and effects | 0–100%, four dimming curves |
| Control | Onboard, DMX512/RDM, CRMX, Ethernet (Art-Net and sACN), Bluetooth app |
| Dimensions | 563 × 498 × 155 mm |
| Weight | Approx. 11.6 kg |
Output Calculator
Select the published setup and a manufacturer distance, or enter a custom throw where supported. The results describe centre-beam output, not the brightness across the whole beam.
Camera Settings
If the calculator does not load, use the published photometric table or source on this page. JavaScript is required.
F-stop is a planning estimate, not a meter reading. It uses direct, on-axis illuminance and includes only the optics and diffusion named in the selected setup. Meter on set to account for lens transmission, filters, added diffusion, bounce, dimming and ambient light.
How the exposure estimate works
N = √(E × ISO × t / C), where E is illuminance in lux and t = shutter angle ÷ (360 × fps). The default C = 340 is a dome reference; C = 250 is a flat reference. These are calibration constants, not a measured T-stop. A small nonzero digit is tenths of a stop above the displayed full stop.
Distance estimates and comparisons
Published points are used as given. Between published points the calculator fits a curve through the two nearest readings. Outside those points it uses the inverse-square law only when the fixture’s dataset permits it. Distances outside a configuration’s supported range are reported separately. Comparisons use one shared distance and camera setup; equal lux does not imply equal coverage.
View published readings for the selected configuration
Model and Family Fit
The P300R is the smaller four-zone soft panel. Compared with the P600R, start with the P300R when the shot needs fewer zones and the larger face would crowd the setup.
Strengths and Limitations
- Strength. The square face gives an even-shaped catchlight for a single subject. Four zones can create a passing colour or intensity cue from one rigged position.
- Limitation. Fan-off operation caps the linear dimmer at 20%. A full-output reading can substantially overstate the level available for a quiet interview.
Practical Uses
| Setup | Placement |
|---|---|
| Interview key | Bring the square face close enough for the desired wrap. Use the honeycomb or a side flag if the lit side of the room needs to stay dark. |
| Interactive screen light | Patch the four zones and send a slow change across the face of the panel. Watch the direction of movement on the actor from camera before recording the cue. |
Output and Colour
Godox measured the following configurations at full brightness. Each cell gives lux followed by the equivalent foot-candles, rounded to the nearest whole foot-candle.
| Configuration | 3 m lux / fc | 5 m lux / fc | 7 m lux / fc | 9 m lux / fc |
|---|---|---|---|---|
| 5,600 K · diffuser fitted | 1,620 / 151 | 748 / 69 | 470 / 44 | 327 / 30 |
| 3,200 K · diffuser fitted | 1,490 / 138 | 689 / 64 | 434 / 40 | 302 / 28 |
At 5 m the diffuser-on readings are 748 lux at 5,600 K and 689 lux at 3,200 K. Those values give a starting exposure for white light. A saturated colour in one zone uses a different mix of emitters and illuminates a smaller area. Meter or photograph the cue at the mark.
Power and Batteries
The fixture accepts 100–240 V AC at 50/60 Hz or an external 48 V DC supply. The manual lists approximately 350 W maximum and 3.5 A AC input. On 48 V DC the panel powers up when the supply is connected, independently of the fixture’s AC switch. Check the complete DC package during prep.
Control, Cooling and Camera Operation
The P300R has 4 independently controllable zones. Select a console personality that exposes the zones before patching wired DMX, CRMX, Art-Net or sACN. The onboard menu also offers CCT, HSI, RGBW, gel and x,y colour controls. In fan-off mode the linear curve tops out at 20% on the dimmer. Auto or High allows full dimmer travel. Check a slow fade in the chosen fan mode and curve.
Modifiers, Rigging and the Working Package
The diffuser slides in a track behind a retaining frame. Check that the frame is locked after a change. The P300RH30 honeycomb controls spill, while the P300RS33 3 × 3 ft softbox gives a larger front face. Book the modifier and yoke with the panel when comparing working weight and clearance.
Choosing the Optic or Modifier
Choose the honeycomb for spill control. Choose the softbox when a larger front surface matters more than the extra depth it takes up.
Alternatives and Related Fixtures
| Related fixture | When to compare it |
|---|---|
| Aputure Nova P300c | A soft RGBWW panel for a rig already using Nova accessories. |
| Creamsource Vortex4 Soft | Another soft colour panel to compare for output, control and rigging weight. |
What People Are Saying
Four-zone setup
Samuel Bouret demonstrates the P300R alongside the wider P600R. Seeing the panels set up together makes their different face shapes and zone layouts easier to judge for an interactive cue. Samuel Bouret’s setup demonstration.
Field Feedback at a Glance
Bouret’s shoot demonstrates the two fixtures in use. The settings and limitations below come from Godox’s operating documentation, not a separate lab test.
What Works Well
- A square soft source. The diffuser is built into the working setup, so you can start with a broad source and add a grid only when the room needs spill control. See both soft panels used together.
- 4 independently adjustable zones. The zones let you vary brightness and colour across a face rather than making the entire panel change at once. This is useful for firelight and interactive colour cues. Godox’s pixel-zone demonstration.
- Patch it into a larger rig. Wired DMX/RDM, CRMX and Art-Net or sACN are available. Pick the protocol and personality during prep, rather than trying to map the zones from an unfamiliar menu on set. Godox control menu and patch options.
Limitations to Check
- Fan mode can cost output. The manual lists output limits with the fan off; the ceiling in Medium Speed also varies with ambient temperature. Take your meter reading in the sound department’s approved fan mode. See Godox’s fan mode table.
- The soft face spreads the beam. Godox lists 1,620 lux at 3 m with the diffuser at 5,600 K. Don’t book this soft fixture based on a P-series Hard model’s readings; check the mounting distance and modifier for the shot. See the illustrated Godox soft-panel specs.
- 48 V DC behaves differently from mains. The manual says the fixture powers up when DC is connected; the fixture’s own power switch does not operate in that mode. Confirm the proper supply and test the actual DC package at prep. See Godox’s battery and DC instructions.
Videos
Samuel Bouret sets up and shoots with the P300R and P600R soft panels.
Rental and Used-Fixture Checks
Test each of the four zones separately, inspect the diffuser and retainer for damage, then run the intended fade in the console personality you will use. Check output after switching to the sound department’s preferred fan mode.
Before You Book
Check the diffuser retainer at the working tilt and run each zone separately from the intended console before loading.
Documentation and Specifications
- Godox operating manual and illuminance tables (PDF)
- Godox series specifications
- Godox USA product photographs and kit listing
Browse Godox lights · LED panels · all equipment.