Mole-Richardson MoleDura Wire Scrim Sizes and Fixture Fit

Last Updated 1 day ago

Mole-Richardson 25876D square double wire scrim for the 1 kW Baby Softlite

A MoleDura wire scrim takes level out of a tungsten fixture while the lamp stays at its working voltage. Match the scrim to the accessory opening, then choose full or half coverage and single or double density. The 6-inch Baby 1K, for example, takes a 6⅝-inch scrim.

Format
Round or square
Coverage
Full or half
Order by
Fixture type and part number

Compatible fixtures

Use the type number on the head. The 300 W Betweenie and 650 W Tweenie II share a scrim set. The 1 kW Baby Fresnel and 1 kW Baby Softlite take different shapes. On the 5 kW Skypan, Mole specifies the 24515 diffuser holder for light-control accessories.

Scrim sizes and part numbers

Fixture and scrim sizeFull single / doubleHalf single / double
InBetweenie 3101 · 3 in round2909S / 2909D2908S / 2908D
Betweenie 3131 and Tweenie II 4821 · 5⅛ in round5523S / 5523D5526S / 5526D
6-inch Baby 3081 · 6⅝ in round407280S / 407280D407281S / 407281D
One-Light Molepar 2271 · 10⅛ in round4099S / 4099DNo half listed in fixture sheet
Skypan 245 and Big Eye Tener 4361 · 29 in round450763S / 450763D450762S / 450762D
1 kW Baby Softlite 2581 · 8 in square25876S / 25876DNo half listed in fixture sheet
4 kW Baby Softlite 3571 · 18⁷⁄₁₆ in square35785S / 35785DNo half listed in fixture sheet

Full, half, single or double?

ChoiceWhat it does
Full single or doubleReduces level across the whole field. Start with a single for a smaller correction or a double for a stronger one. Meter the result on the mark.
Half single or half doublePuts mesh across one side of the opening. Rotate it to reduce the hotter end of a wall wash or the near end of an actor’s walk.
When colour mattersA scrim lets the tungsten lamp stay at the voltage you chose. Dimming the same lamp also shifts its colour warmer.

On set

For two actors at different distances from one Fresnel, bring the far mark to exposure first. Turn a half scrim until its mesh covers the near mark, then check both faces. If you need a hard edge on the background, use a flag or barn door for the cut.

Rental and used-gear checks

  • Measure the accessory opening or check the type sheet. Lens diameter and scrim diameter can differ.
  • Check the part number and the mesh itself. A full single and a half double solve different problems even if their rings fit the same head.
  • Inspect for loose mesh, bent rims or a warped square frame. Check that the head’s accessory retainer closes with the intended scrims fitted.

Back to contents