Aputure Quick Dome 90 Softbox

Last Updated 1 day ago

Aputure Quick Dome 90 with its round front diffusion in place

The Quick Dome 90 gives a Bowens-mount head a 90 cm round face for close interviews, portraits and product reflections. A latch tensions the rods together. Two front cloths and a removable grid let the crew trade output for diffusion or spill control from the same position.

Diameter
90 cm / 3 ft
Mount
Bowens
Grid
40°

Compatible fixtures

Aputure identifies the STORM 400x and 700x as design pairings. Its Quick Dome 90 compatibility list also includes the 1000c, 1200x and the Light Storm heads below. The readings on this page apply to the STORM 700x only.

Key specifications

SpecificationDetails
Part numberAA07060382
Build16 steel rods and quick-release speed ring
Front cloths1-stop and 2-stop diffusion
Also suppliedInner baffle, 40° fabric grid and carrying bag

STORM 700x output by front cloth

Aputure measured these four configurations at 5,600 K. Both readings in each row use the same head and front cloth, so you can see what adding the grid costs at that distance.

ConfigurationAt 3 mAt 5 m
1-stop cloth2,910 lux / 270 fc1,053 lux / 98 fc
1-stop cloth with grid2,432 lux / 226 fc826 lux / 77 fc
2-stop cloth1,771 lux / 165 fc638 lux / 59 fc
2-stop cloth with grid1,445 lux / 134 fc495 lux / 46 fc

On set

For a seated interview close to a white wall, set the dome where the catchlight and shadow edge look right first. Add the grid if the wall lifts. If the subject loses too much level, the published 700x readings show how much you can recover by swapping to the lighter cloth while keeping the grid.

Rental and used-gear checks

  • Confirm both marked front cloths, the inner baffle and the grid are in the bag.
  • Open the latch and sight across the rim. A rod that misses its seat can produce a flat spot in a round reflection.
  • Check clearance for the dome and its side handle at the intended tilt, especially under a low ceiling.

Back to contents