Last Updated 1 day ago

The Spotlight Max turns a compatible Aputure point source into a projector for window patterns, shutter cuts and isolated pools of light. Choose the lens when booking. The 19°, 36° and 50° lenses give different coverage at the same throw, and a lens-only booking leaves out the projector body.
- Lens options
- 19° / 36° / 50°
- Minimum focus
- 2 m
- Gobos
- A or B size
Compatible fixtures
Aputure lists these heads for the Spotlight Max. Its 36° kit includes the projector, lens, yoke, rotating gobo holder, three A-size gobos and rolling case. When combining a rental head with an owner-operator lens, confirm that both the housing and lens belong to the Max system.
- Aputure Electro Storm XT26
- Aputure Electro Storm CS15
- Aputure STORM 700x
- Aputure STORM 400x
- Aputure STORM 1200x
- Aputure STORM 1000c
- Aputure Light Storm LS 1200d Pro
- Aputure LS 600c Pro II
- Aputure LS 600c Pro (Original)
- Aputure Light Storm LS 600d Pro
- Aputure Light Storm LS 600x Pro
- Aputure Light Storm LS 600d
- Aputure Light Storm LS 300x
- Aputure Light Storm LS 300d II
Key specifications
| Specification | Details |
|---|---|
| Head mount | Bowens |
| Beam shaping | Four internal shutter blades |
| Pattern control | Geared rotating holder for A- or B-size steel or glass gobos |
| Minimum focusing distance | 2 m |
| Optional items | Spotlight Max iris and ETC lens adapter, each supplied separately |
Choosing the lens
| Lens | When it earns its place |
|---|---|
| 19° | Small target at a longer throw. On an LS 600d Pro, Aputure lists 23,100 lux at 3 m and 5,600 K. |
| 36° | A mid-size window or doorway pattern. The same 600d Pro at the same distance delivers 8,200 lux with this lens. |
| 50° | Use for a wider pattern when the room limits the throw. Leave at least the specified 2 m to the projection surface if the pattern must focus. |
On set
For a window pattern, focus on the wall or floor where the mullions need to read. Rotate the gobo to set their angle, then use the shutters to keep the pattern off the ceiling. If a soft window edge is wanted, defocus after the shutters and pattern are aligned.
Rental and used-gear checks
- Specify the lens angle and whether the booking is a complete kit or a lens alone.
- Check all four shutters travel, the holder rotates, and the gobo is the size required. Request the iris if the shot calls for a variable circle.
- Include the Max yoke and follow the manual’s support arrangement for the chosen head. Check balance before releasing the tilt lock.